Request For Quotation Goods For Dispensary Needs

Lamp Drt-400 Arc Discharge Tubular Mercury High Pressure. Powerful Source Of Ultraviolet Radiation. The Drt-400 Lamp Is Widely Used In Medicine, Medical Equipment, Biology, And Agriculture. In Medicine, Drt 400 Is Used In Uv Radiation Sources (Ork-21), Irradiators, Recirculators, Installations For Water Disinfection, Chambers For Maintaining The Sterility Of Instruments. The Drt-400 Lamp Is A Tube-Flask Made Of Quartz Glass, Filled With A Dosed Amount Of Argon And Mercury, In The Vapor Of Which An Arc Discharge Occurs. The Current-Carrying Pins Of The Lamp Are Connected To The Electrical Network. Specifications: Supply Voltage:220V Current Frequency:50Hz Lamp Power:400W Lamp Voltage:135V Throttle Voltage When Turned On: 220 V Turn-On Current: 6A Throttle Voltage In Operating Mode: 144 V Operating Current: 3.25 ±0.1A Radiant Flux:39W Burning Duration: 2700H Working Position: Horizontal±10° Length:250Mm Diameter:22Mm Weight:65G Drt Lamps (Mercury Arc Tube Lamps) Are Sources Of Ultraviolet Radiation Used In Medicine, Agriculture, And In Measuring Technology For Luminescent Analysis. Certain Types Of Drt Lamps Are Used In Technological Processes Of Water Disinfection, Polymerization And Drying In Industry. The Optimal Temperature For Operating Drt Lamps Is From 15° C To 30° C. Drt Lamps Operate On A Mains Power Supply With A Current Frequency Of 50 Hz, A Voltage Of 220 And 380 V, With Special Ballasts (A Capacitor Strip Or Choke Located In The Lamp). Tu 16-90.Ifmr.675610.002 Tu, Sea Salt For Baths In A Package With A Handle 1500.0 G Per Package. With The Aroma Of Juniper Concentrate. Download Gost R 51574-2018, Stamp Ink 28Ml, Blue, Trodat. Ink For Hand Seals And Stamps (Stamp Ink): Water-Based - For Plain Paper. Stamp Ink Is Intended For Refilling Desktop Ink Pads, Automatic Equipment, Daters And Numberers. Provides A Clear, Bright Print On Paper. Base: Water-Glycerin (Water-Based), Without Alcohol And Oils. Compatibility With Cliches: Suitable For All Types Of Cliche Materials (Photopolymer, Rubber). Surface For Application: Paper And Cardboard (Non-Absorbent And Glossy Materials Are Not Provided). Print Drying Time: No More Than 30 Seconds (With Standard Paper Density). Color Range: Bright And Rich (Blue). Properties: Non-Toxic, No Pungent Odor, Fade Resistant. Release Form: Plastic Bottle With A Narrow Dispenser Spout For Careful Refilling. Volume (Nominal): Standard From 28 To 30 Ml. Capping: Tightly Screwed Cap To Prevent Leakage During Transportation. Labeling: The Bottle Must Contain Information About Color, Composition, Production Date And Expiration Date. The Product Must Comply With Sanitary And Epidemiological Standards. The Paint Should Not Dry Inside The Closed Stamp Pad For A Long Time And Should Not Destroy The Rubber Or Photopolymer Of The Cliche., Outdoor Flag Of The Republic Of Kazakhstan, Polyester, Density 110 Mg. Width, Cm 200 Height, Cm 100 Color Blue Fabric Type Polyester. Features Double-Sided Location Street Installation Outdoor Mounting Type Luff Standard Ct Pk 988-2007 Density, G/M² 110. Without Flagpole. Single-Layer, Fabric: Flag Mesh (Polyester). Production: Sublimation Thermal Printing. The Ratio Of The Width Of The Flag To Its Length Is 1:2, Strict Compliance With The State Standard Of The Republic Of Kazakhstan St 988-2007. Purpose: The Product Is Intended For Outdoor Use.