Request For Quotation Purchasing Spare Parts

Spark Plug Number Ldk 7Rf-Sd 1 Set (4 Spark Plugs). For An Injection Engine (Zmz-405, 406 Or 409) On A Gaz-27057, Spark Plugs With An M14x1.25 Thread, A Thread Length Of 19 Mm And A Hexagon Of 21 Mm Are Required. The Recommended Gap On Gasoline Is 0.7–1.0 Mm, And If Hbo (Gas) Is Installed - 0.7–0.9 Mm Main Technical Characteristics Thread: Diameter M12 × 1.25 Key Size: 16 Mm Center Electrode Material: Nickel With V-Shaped Notch Heat Number: 22 Recommended Gap: 0.8 Mm Analogue (Oem): Brisk Qr15lc. These Spark Plugs Are Designed For The Specific Parameters Of The Evotech 2.7 Engine, Which Ensures Stable Sparking And Reliable Engine Starting. Mandatory Approval Of The Sample With The Customer, Uaz Injection Air Filter, To Be Agreed With The Customer, Fuel Filter, Uaz Injection Thread M14*1.5, Identical. Coordination Of The Sample With The Customer, Oil Filter For Uaz 16-Valve. Height 96.0 Mm. Complete Set: With Return Valve. Tightening Torque 20 Nm, Diameter 2 72.0 Mm, Diameter 93.2 Mm. Gasket Diameter 62.0 Mm. Connecting Screw Thread 3/4-16Unf-2B. Valve Type Bypass Valve. Filter Design - Screw-On Filter. Mandatory Sample Approval With The Customer, Gearbox For The All-Wheel Drive Gazelle (Gaz-27057), The Factory Index Ak12m2 (Or Ak12 M2) Designates The Base Material Of The Crankcase Body - It Is A Cast Aluminum Alloy, And The Gearbox Itself Is A Standard 5-Speed Manual Transmission Used On Commercial Vehicles. Key Characteristics Of Manual Transmission Type: Mechanical, Three-Shaft, 5-Speed, Fully Synchronized. Gear Control: Depending On The Year Of Manufacture, A Classic Floor-Mounted Rocker Or A Modern Cable Drive Can Be Used. Main Pair (Gear Ratio): Depends On The Modification Of The Bridge, Most Often It Is 5.125. Gear Ratios: 1St Gear: 4.052Nd Gear: 2.343Rd Gear: 1.3954Th Gear: 1.005Th Gear: 0.849 Reverse: 3.51 Drive: Permanent All-Wheel Drive (4X4), Designed To Work With Transfer Case. Housing: Made Of Silumin (Ak12m2 Alloy), Which Ensures High Strength With Low Weight. Be Sure To Agree On The Model With The Customer