Tenders Are Invited For Reconstruction Of The Engineering Structure No. Jni 01028041 Along The District Road No. 1099T In The Town Of Koniemłoty At Km 2+487

1. The Subject Of The Order Includes The Reconstruction Of The Engineering Structure No. Jni 01028041 Along The District Road No. 1099T In The Town Of Koniemłoty At Km 2+487 In The Scope Of: 1) Demolition Of The Existing Culvert, Along With Abutments With The Following Parameters: Diameter D = 1.20 M - 2 Pcs., Culvert Cross-Section F = 2.26 M2, Length L = 9.30 Mb,2) Construction Of A New Culvert With Clear Dimensions Of 3 M X 1.5 M And A Length Of 10.60 M On The Koniemłocki Potok Stream, The Culvert Was Designed As A Closed Box-Shaped One Made Of Prefabricated Reinforced Concrete Elements,3) Reconstruction Of A 30 M Long Road Section With A Road Width Of 6.50 M Along The District Road No. 1099T In The Town Of Koniemłoty With A Bituminous Surface.2. A Detailed Description And Method Of Execution Of The Order Includes: Design Documentation Constituting - Annex No. 7 To The Swz, Bill Of Quantities Constituting - Annex No. 8 To The Swz And Technical Specifications For The Execution And Acceptance Of Construction Works Constituting - Annex No. 9 To The Swz. All Documents Describing The Subject Of The Contract Should Be Treated As Mutually Complementary And Clarifying In The Sense That If Any Ambiguities Or Ambiguities Are Found, The Contractor Cannot Limit Either The Scope Of Its Obligation Or The Scope Of Due Diligence In The Performance Of Its Obligations Under The Public Procurement Contract.3. As Part Of The Order, The Contractor Is Obliged In Particular To: 1) Develop, Implement And Maintain Temporary Traffic Organization For The Duration Of The Works, Including Designating A Detour For Road Traffic And Ensuring The Continuity And Safety Of Pedestrian Traffic By Constructing And Maintaining A Temporary Footbridge, 2) Placing A Board On The Sources Of Financing (A Board Made Of A Composite Board, Plastic Plexiglass Or Pvc With A Minimum Thickness Of 3 Mm Or Placed On A Metal Base With A Double Rolled Edge - 1 Pc. With Dimensions 180 × 120 Cm),3) Keeping A Construction Log,4) Surveying Services Together With An As-Built Inventory - The Road And Devices In The Road (Paper And Electronic Version),5) Providing As-Built Documentation (As-Built Cost Estimate, Declarations, Inventory, Documentation Necessary To Obtain An Occupancy Permit Along With Confirmation Of Submitting A Complete Application For An Occupancy Permit, Etc.), 6) Tidying Up The Construction Site And Handing It Over To The Ordering Party On The Day Of Final Acceptance Of The Works, 7) Full Liability Of The Contractor For Violating Environmental Protection Regulations On The Construction Site And In The Area Adjacent To The Construction Site And For Waste Management To The Extent That The Ordering Party Is Completely Relieved Of This Responsibility.4. The Works That Are The Subject Of The Order Must Be Performed Using The Contractors Own Materials And Equipment. 5. The Task Is Co-Financed From The State Budget From The Subsidy Reserve For 2026. 6. Additional Information In Chapter Iv Of