Tenders Are Invited For Reconstruction Of District Road No. 1934R Lutcza Through The Village With Reconstruction Of The Intersection With Dk19

1. The Order Concerns The Reconstruction Of District Road No. 1934R Lutcza Through The Village With The Reconstruction Of The Intersection With Dk 19 - Stage I At Km 0+445-0+735 And 1+235 - 1+695. 2. The Scope Of The Works Includes: Dismantling The Reinforcements Of The Inlets/Outlets Of The Culverts Under The Road Crown And Under The Exits, With The Material Being Transported To A Landfill Next To The Facility For Reuse, Earthworks Performed With A Grader - Removing The Inflated Dirt Shoulders, Leaving Them Within The Area Of The Works And Spreading Them Out, Cross-Cutting The Asphalt Surface With A Saw Within The Culverts Under The Road Crown And At The Connections With The Existing Surface, Excavation Of Parts Of The Through Culverts Under The Road Crown And Exits, Together With The Transport Of Demolition Material To The Site Near The Facility, For Use In Backfilling The Culverts Under The Exits And For Embedding Them In The Road Slope, Dismantling Culverts Made Of Reinforced And Unreinforced Concrete Pipes Under The Road Crown And Exits, Together With Depositing Them At The Site Next To The Facility, Earthworks - Making Trenches For Laying The Through Part Of The Culverts Under The Road Crown With Removal Of Soil From The Excavation For A Distance Of Up To 3 Km, Construction Of A Footing Of Cement-Stabilized Aggregate For The Through Part Of The Culvert Under The Road Crown, Construction Of Through Parts Of The Culverts Under The Road Crown From Corrugated Pipes Connected With A Gasket, Backfilling Of The Culverts Under The Road Crown With Mechanically Stabilized Gravel, Construction Of A Footing Of Crushed Aggregate For The Through Parts Of Culverts Under Exits, Construction Of The Through Part Of The Culvert Under The Exits, Made Of Corrugated Pipes Connected With A Gasket, Straight Ends, Backfilling Of The Culverts Under The Exits With Gravel, 50% Recycled Material, Protection Of The Inlets And Outlets Of The Culverts Under The Road Crown And Exits With Crushed Stone Embedded In Concrete, Milling Of The Asphalt Surface, Construction Of The Base Using The Cold Deep Recycling Method Binding Material Of The Silment Cq-25 Type Or Other With Equivalent Parameters (E.G. Cement), Using A Self-Propelled Recycler-Remixer Device With Automatic Dosing Of Water For The Recycling Process, Making The Upper Layer Of The Base Course From A Mixture Of Crushed Aggregate, Making A Binding Layer Of Mma Together With Sprinkling The Existing Base Course With An Asphalt Emulsion, Making A Wearing Course Of Mma Along With Sprinkling The Binding Layer With An Asphalt Emulsion, Hardening Roadsides With Crushed Aggregate, Desilting Road Ditches Along With Removing Silt From The Passage Parts Under The Exits, Removal Of Excavated Material For A Distance Of Up To 2 Km, Supplementing The Exits With Crushed Aggregate, Dismantling The Existing Surface On The Exits To The Property And Re-Laying It Using Material From The Demolition (Curbs, Paving Stones, Iomb Slabs, Etc.