Tenders Are Invited For Construction Of A Civil Defense Warehouse At The Volunteer Fire Department In Baranów

1. The Subject Of The Order Is: Construction Of A Civil Defense Warehouse At The Volunteer Fire Department In Baranowo. The Order Includes: Category Of Construction Object: Xviii1) The Subject Of The Order Is The Construction Of A Civil Defense Warehouse Located On The Plot Marked With Number 543/5, Located In Baranowo, Commune. Baranowo As Part Of The Investment Project Entitled: Construction Of A Civil Defense Warehouse At The Volunteer Fire Department In Baranowo Based On The Attached Design Documentation. Construction Of The Designed Warehouse: Foundation Footingsfoundation Footing Dimensions 140X100x40cm, Upper Reinforcement Fi 12Mm At A Spacing Of 18/18Cm, Lower Reinforcement Fi 12Mm At A Spacing Of 18/18Cm. Foot Shaft With A Cross-Section Of 25X25cm, Main Shaft Reinforcement 8Mm And 12Mm, Stirrups 8Mm Every 10Cm. Concrete Class C20/25, W8. Footing Level - 1.1 M Below Ground Level. Make Lean Concrete Under The Footing. Min. 10Cm, Class C8/10. Ground Wall, 25 Cm Thick And 30 Cm High. Wall Reinforcement With Double-Sided Q523 Mesh (Fi 10 Mm At 15/15 Cm Spacing), Concrete Class C20/25, W8, A-Iiin Steel. External Walls External Walls In Steel Structure - Main Steel Column (Profile 2Xz250/68/60/2.5 Mm, Steel S350 Gd, Intermediate Steel Column (Profile Rk100x4 Mm, Steel S235). 24 Cm Thick. Facade Walls - Gray Sandwich Panel. Roof Basic Parameters: Building Height - 7.62 M Building Width - 10.37 M Number Of Above-Ground Storeys - 1 Designed Building Area - 158.87 M2 Building Area - 143.3 M M22) A Detailed Description Of The Subject Of The Order Can Be Found In The Annexes To This Swz, I.E., In Particular, In The Design Documentation: - Land Development Design - Architectural And Construction Design - Annexes To The Construction Design - Technical Design - Bill Of Quantities - Stwior - Technical Specification The Ordering Party Informs That It Has Obtained A Building Permit For The Implementation Of The Task In Question. Note! It Is Recommended That All Contractors Submitting Price Offers Familiarize Themselves With The Bill Of Quantities In Detail And Make A Site Visit Of The Future Construction Site And Its Surroundings. Method Of Settling The Contract - Lump Sum. Before Signing The Contract, The Contractor Will Present The Ordering Party With An Offer Cost Estimate, Which Will Constitute An Annex To The Contract. The Cost Estimate Should Be Prepared Based On The Bill Of Quantities. The Bills Of Quantities Are Of An Auxiliary And Illustrative Nature.