Tenders Are Invited For Theater Seats - Replacing Seats And Adapting The Cinema And Entertainment Hall For People With Special Needs At The Municipal Cultural Center Centrum In Zawiercie.

Theater Seats - Replacing Seats And Adapting The Cinema And Entertainment Hall For People With Special Needs At The Municipal Cultural Center Centrum In Zawiercie.. 1. The Subject Of The Order Is: Replacement Of Seats And Adaptation Of The Entertainment And Cinema Hall For People With Special Needs In The Municipal Cultural Center Centrum In Zawiercie. 2. The Warranty Period For The Delivered Material, I.E. Seats And For The Assembly Services Performed Is Min. 60 Months Starting From The Date Of Signing The Final Protocol By The Ordering Party. 3. Requirements Regarding Accessibility For Disabled People Or Design For All Users (Article 100(1) Of The Public Procurement Law). As Part Of The Project Entitled: Replacement Of Seats And Adaptation Of The Entertainment And Cinema Hall For People With Special Needs At The Municipal Cultural Center In Zawiercie, The Entertainment And Cinema Hall Will Be Adapted For People With Special Needs. 4. The Project Is Co-Financed Under The Operational Programs Of The Polish Film Institute. 5. The Order Covers The Performance Of Works In The Mok Centrum Entertainment And Cinema Hall Located On The Ground Floor, Consisting Of:  Dismantling 560 Pieces Of Old Armchairs From The Cinema Hall,  Installation Of 538 Pieces Of Seats In Accordance With The Ordering Partys Instructions Using Chemical Anchors,  Removal And Disposal Of Old Seats And Other Dismantled Elements. The Area Of ​​The Mok Entertainment And Cinema Hall, Including The Stage, Stage Area And Audience, Is 834.1 M2. 6. Technical Description Of The Seats: Chair Foot - Made Of Profiled, Embossed Sheet Metal With A Height Of Min. 25Mm (Durable And Aesthetic Element - No Visible Welds) With Mounting Hole Spacing, Min. 240Mm. Supporting Structure - Made Of Metal Profiles - Leg Support Made Of A Minimum Profile Of 60X30x2mm. The Foot Of The 3D Chair Is Made Of Profiled, Embossed Sheet Metal With A Height Of Min. 25Mm (Durable And Aesthetic Element Without Visible Welds). Structures With A Metal Profile Thickness Of Less Than 2 Mm, Made Of Plastic And Containing Wooden Elements Are Not Allowed. Backrest: Flame-Retardant, Made Of Pu Foam, Made Using Mold Injection Technology. Metal Frames Are Embedded Inside The Foams, Constituting The Load-Bearing Element Of The Structure, Which Has A Significant Impact On Strength And Resistance To Deformation. Minimum Foam Thickness 4 Cm. The Backrest Is Profiled In Two Planes, Horizontally And Vertically. The Backrest Is Equipped With Protective Plywood. Seat: Profiled - Made Of Flame-Retardant Pu Foam Formed Using Mold Injection Technology. Inside The Seat There Are Metal Frames That Constitute The Load-Bearing Element Of The Structure, Which Has A Significant Impact On The Strength And Resistance To Deformation - A Frame Based On Plywood Or Plastic Is Not Allowed. Seat Foam Thickness: Minimum 10 Cm. The Seat Is Mounted On A Polyamide Saddle, Which Is Attached To The Supporting Structure With 4 Screws. The Seat Is Secured With A Polyamide Ring To Prevent It From Falling Out. The Seat Is Upholstered On Both Sides, Without A Cover. Backrest Cover: Profiled In Two Planes, Horizontally And Vertically, Adjustable