Tenders Are Invited For Taps, Cocks, Valves And Similar Appliances - Valserve Gy. Vel-Pak And Rama Type Fittings And Alk.

Taps, Cocks, Valves And Similar Appliances - Valserve Gy. Vel-Pak And Rama Type Fittings And Alk.. The Purpose Of The Public Procurement Is The Delivery Of Vel-Pak And Rama Fittings And Their Components Manufactured By Valserve In 2026-2031. For Years As Follows: In The Framework Of A 60-Month Framework Agreement. 1. The Purpose Of The Public Procurement Is The Acquisition Of Vel-Pak And Rama Fittings And Their Parts Manufactured By Valserve. The Vel-Pak-01-20 Type Complete Fittings (Armatures) Are Special Elements Installed In The Primary Circuit And Secondary Circuit Technological Systems Of Blocks 1-4 Of The Paks Nuclear Power Plant, Which Play A Prominent Role In Ensuring The Safe Operation Of The Paks Nuclear Power Plant. The Vel-Pak-01-20 Armatures Were Procured And Installed In The Technological System During The Investment Works Of Blocks 1-4 Of The Paks Nuclear Power Plant. The Valserve Type Vel-Pak-01-20 Or Equivalent* Armature Parts That Are The Subject Of The Public Procurement Are Essential Parts For Maintaining The Functional And Safe Condition Of The Assemblies Installed During The Construction Of The Paks Nuclear Power Plant. In Connection With The Vel-Pak 12-1 Type Fittings (Blocks 3-4) Installed In The Injection System Of The Volume Compensator, During The Past Operating Period, There Was Such A Degree Of Wear On The Closing Seat That Justified The Replacement Of The Valve. During The Technical Monitoring And Market Survey Carried Out By The Technical And Maintenance Organizations (With A Reference Delivered To Position Abos1, A Nuclear Facility), The Rama Type Produced By Valserve S.A.S., With A Replaceable Seat And Replaceable Closing Body Design That Meets The Expectations Of The Time, Which Significantly Shortens The Maintenance Time (The Alara Principle* Applies), And Due To The Design, The Previous Delivery Deadlines For Parts, Was Found To Be Correct. Are Shortened. *The Contracting Authority Determines The Equivalence As Follows: In This Procedure, The Replacement Part Is Equivalent. Interchangeable Armatures And Armature Parts Are All Armatures And Armature Parts That Can Be Replaced With Another Armature And Armature Component Without Any Special Repair Or Further Processing, The Armatures And Armature Parts Can Be Incorporated Into The Primary Circuit And Secondary Circuit Technological Systems Of Nuclear Power Plants Without Any Further Modification, Which Are Identical In Shape And Nominal Size, Their Size And Shape Deviation Are Within The Permitted Tolerance And The Material Quality Is The Same. It Is The Tenderers Responsibility To Ensure And Prove Equivalence. The Tenderer Is Obliged To Support The Equivalence With A Certificate From The Original Manufacturer, In Accordance With Art. 321/2015 On The Method Of Certifying Suitability And Grounds For Exclusion In Public Procurement Procedures, As Well As Determining The Technical Description Of Public Procurement. (X.30.) According To Section 46 (5) Of Government Decree. ** 9/2022 On The Safety Requirements Of Storage Facilities That Ensure The Temporary Storage Or Final Disposal Of Radioactive Waste And Related Official Activity. (Xii. 29.) According To Section 2.2 Of The Oah Decree: Alara Principle: Basic Principle Of Radiation Protection, Which