Tenders Are Invited For Industrial Machinery – A. Compactor

Industrial Machinery – A. Compactor. The Order Concerns The Purchase And Delivery Of A Compactor. Specification Of The Subject Of The Order: 1. Intended Use And Process Function: A) Compactor Designed To Reduce Humidity In The Processing Material Indicated In Chapter Ii, Point. 5. I.E. Waste Ldpe And Lldpe Foil Of Municipal Origin After The Initial Shredding Stage And The Washing, Hydroseparation And Initial Humidity Reduction Processes Using A Centrifuge. B) The Compactor Must Carry Out The Moisture Reduction Process In At Least Two Stages. C) The Compactor As A Technological System Will Act As A Squeezing Press And, In The Final Phase, The Compactor Must Ensure Loosening Of The Structure Of The Processing Material In Order To Transport It To The Next Stages Of The Process. Reducing Humidity. D) Maximum Permissible Level Of Material Moisture At The Outlet - 6%. 2. Working System, Its Elements And Parameters: A) Stainless Steel Hopper B) Screw Press - Screw Conveyor (Element Used To Properly Compact The Material) - Minimum Diameter Of 590 Mm. Planetary Drive Of The Screw Via An Electric Motor With A Power Ranging From 50 To 60 Kw. C) Pressure Using A Hydraulic Pressing System With A Drive Power Ranging From 3 To 5 Kw. D) Liquid Collector And Cylindrical Sieve For Liquid Removal Made Of Stainless Steel E) Front Shredder Acting As A Device For Loosening The Material Before It Is Fed To Agglomeration. Driven By An Electric Motor With A Power Ranging From 7 To 10 Kw. F) Stainless Steel Feeding Screw (For The Transport Fan) G) Flake Transport Fan With A Belt Transmission, Driven By An Electric Motor With A Power Ranging From 20 To 25 Kw. Basic Requirements Below Are The Basic Requirements Specified In Relation To The Subject Of The Order And The Bidder, The Inability Of Which To Be Met By The Bidder Results In A Negative Assessment And Rejection Of The Offer: 1. The Subject Of The Offer Must Relate To And Be Consistent With The Subject Of The Contract Described In Chapter Ii And Must Take Into Account The Specifications Contained In Chapter Iii Of The Inquiry. 2. Achievement Of The Assumed Processing Parameters: A) Minimum Hourly Efficiency - 1.5 Mg In Relation To The Output Material Meeting The Maximum Humidity Condition Indicated Below In Point. B) B) Maximum Material Humidity At The Outlet – 6%. 3. Special Payment Conditions That Will Be Included In The Future Contract: A) The Applicable Form Of Remuneration, In Accordance With The Accepted Offer Of The Bidder, Will Be A Lump Sum Price, I.E. An Amount Determined In Advance In Accordance With The Bidders Offer, Without The Possibility Of Increasing It. B) A Minimum Of 40% Of The Net Remuneration Payable After The Parties Have Signed The Final Acceptance Protocol Without Any Reservations. 4. The Minimum Warranty Period For The Device Is 12 Months. The Warranty Period Will Be Counted From The Date Of The Final Acceptance Report (Without Reservations) Of The Subject Of The Order. 5. Minimum Requirements For Warranty Service And Inspections During The Warranty Period: A) Ob