Request For Quotation Purchase Of Steel Valve

Product Name: Steel Flanged Wedge Gate Valve. Quantity: 2 (Two) Pieces. Main Technical Characteristics Nominal Diameter (Dn) - 100 Mm. Nominal Pressure (Pn) - 25 (2.5 Mpa). Type - Wedge, Full Bore. Execution: With Retractable Spindle. Connection - Flange According To Gost 33259. Control - Manual, Flywheel. Construction Length - 230 Mm. The Seal Tightness Class Is “A” According To Gost 9544. Working Environment - Water, Steam, Oil Products And Other Non-Aggressive Media. Working Environment Temperature - From −40 °C To +425 °C. The Body And Cover Are Cast, Made Of Carbon Steel. The Housing Design Is Detachable. The Wedge Is Steel. The Spindle Is Corrosion-Resistant Stainless Steel. Sealing Surfaces Are Stainless Steel. Height - No Less Than 650 Mm. Weight - Not Less Than 55 Kg. Climatic Version - U1 According To Gost 15150. Full Resource - At Least 2000 Cycles. Service Life - At Least 10 Years. Warranty - At Least 24 Months From The Date Of Commissioning, But Not Less Than 36 Months From The Date Of Delivery. Labeling Requirements The Marking Must Be Made By Casting Directly On The Body And Contain: Trademark (Or Name) Of The Manufacturer; Product Designation; Dn 100; Pn 25; Brand Of Body Material; Date (Or Code) Of Manufacture; Batch Number (If Available). Additional Requirements The Body And Cover Must Be Made From Carbon Steel By Casting. Lightweight Versions And Products With Reduced Body Wall Thickness Are Not Allowed. The Weight Of The Product Must Correspond To The Manufacturer’S Passport Data. Each Valve Must Undergo Factory Hydraulic Testing For Strength, Body Tightness And Valve Tightness. Delivery Fully Assembled And Ready For Use. The Delivery Set Includes: Product Passport, Operation Manual, Acceptance Document With A Hydraulic Test Mark. The Product Is New, Not Previously Used, Not Refurbished Or Repaired. .Delivery Abay, Product Name: Steel Flanged Wedge Gate Valve. Main Technical Characteristics Nominal Diameter (Dn) - 200 Mm. Nominal Pressure (Pn) - 25 (2.5 Mpa). Type - Wedge, Full Bore. Execution: With Retractable Spindle. Connection - Flange According To Gost 33259. Control - Manual, Flywheel. Construction Length - 400 Mm. The Seal Tightness Class Is “A” According To Gost 9544. Working Environment - Water, Steam, Oil Products And Other Non-Aggressive Media. Working Environment Temperature - From −40 °C To +425 °C. The Body And Cover Are Cast, Made Of Carbon Steel. The Housing Design Is Detachable. The Wedge Is Steel. The Spindle Is Corrosion-Resistant Stainless Steel. Sealing Surfaces Are Stainless Steel. Height - No Less Than 980 Mm. Weight - Not Less Than 180 Kg. Climatic Version - U1 According To Gost 15150. Full Resource - At Least 2000 Cycles. Service Life - At Least 10 Years. Warranty - At Least 24 Months From The Date Of Commissioning, But Not Less Than 36 Months From The Date Of Delivery. Labeling Requirements The Marking Must Be Made By Casting Directly On The Body And Contain: Trademark (Or Name) Of The Manufacturer; Product Designation; Dn 200; Pn 25; Brand Of Body Material; Date (Or Code) Of Manufacture; Batch Number (If Available). Additional Requirements The Body And Cover Must Be Made From Carbon Steel By Casting. Lightweight Versions And Products With Reduced Body Wall Thickness Are Not Allowed. The Weight Of The Product Must Correspond To The Manufacturer’S Passport Data. Each Valve Must Undergo Factory Hydraulic Testing For Strength, Body Tightness And Valve Tightness. Delivery Fully Assembled And Ready For Use. The Delivery Set Includes: Product Passport, Operation Manual, Acceptance Document With A Hydraulic Test Mark. The Product Is New, Not Previously Used, Not Refurbished Or Repaired. Delivery In Abay, Product Name: Steel Flanged Wedge Gate Valve. Quantity: 2 (Two) Pieces. Main Technical Characteristics Nominal Diameter (Dn) - 50 Mm. Nominal Pressure (Pn) - 25 (2.5 Mpa). Type - Wedge, Full Bore. Execution: With Retractable Spindle. Connection - Flange According To Gost 33259. Control - Manual, Flywheel. Construction Length - 180 Mm. The Seal Tightness Class Is “A” According To Gost 9544. Working Environment - Water, Steam, Oil Products And Other Non-Aggressive Media. Working Environment Temperature - From −40 °C To +425 °C. The Body And Cover Are Cast, Made Of Carbon Steel. The Housing Design Is Detachable. The Wedge Is Steel. The Spindle Is Corrosion-Resistant Stainless Steel. Sealing Surfaces Are Stainless Steel. Height - No Less Than 450 Mm. Weight - Not Less Than 22 Kg. Climatic Version - U1 According To Gost 15150. Full Resource - At Least 2000 Cycles. Service Life - At Least 10 Years. Warranty - At Least 24 Months From The Date Of Commissioning, But Not Less Than 36 Months From The Date Of Delivery. Labeling Requirements The Marking Must Be Made By Casting Directly On The Body And Contain: Trademark (Or Name) Of The Manufacturer; Product Designation; Dn 50; Pn 25; Brand Of Body Material; Date (Or Code) Of Manufacture; Batch Number (If Available). Additional Requirements The Body And Cover Must Be Made From Carbon Steel By Casting. Lightweight Versions And Products With Reduced Body Wall Thickness Are Not Allowed. The Weight Of The Product Must Correspond To The Manufacturer’S Passport Data. Each Valve Must Undergo Factory Hydraulic Testing For Strength, Body Tightness And Valve Tightness. Delivery Fully Assembled And Ready For Use. The Delivery Set Includes: Product Passport, Operation Manual, Acceptance Document With A Hydraulic Test Mark. The Product Is New, Not Previously Used, Not Refurbished Or Repaired. Delivery In Abay