Quotation Are Invited For Filter;Water;316 S/Stl;Open/Close No 1

Quotation are invited for Filter;Water;316 S/Stl;Open/Close No 1 Delivery Date: 2026/09/07 Delivery To: Electricity - Steenbras P S RED1 Plant / PH: 840 4102 Delivery Address: 1 Off Sir Lowry Road, Gordons Bay Closing Date: 2026/07/16 Closing Time: 04:00 PM Description: 24 each x filter;water;316 s/stl;open/close no 1 Specification: * FILTER - TYPE: Water; MATERIAL: 316 Stainless Steel; SPECIFIC USE: For Opening and Closing Governor Filter NO 1; MODEL: 852264 DRG Mic 25 or equivalent; FILTER DIMENSIONS:A=128mm,B91.5mm,C=91.5mm,D=192mm,E=1.5mm ,F=195mm as per drawing; FILTER ELEMENT SPECIFICATIONS: Micron (25 Mic), Media (Wire4 Mesh), Flow Direction (Est-Int), Pressure Collapse (16 Bar), Seal Material (NBR), By-Pass (No), Pressure drop chart in accordance with IOS 3968 (Class B) at clean element 30 cst viscosity 0.86 Kg/dm3 density mineral oil; GUIDELINE: Wherever reference is made to any particular Trade Mark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent". IMPORTANT: QUOTATION CONDITIONS: The quotation condition listed below are in addition to those contained in the CCT standard quotation conditions and must be fully complied with: Clause 3: General Obligations 3.6.1.1 For this quotation, purchase orders / works packages will be determined and created as follows: 3.6.1.1.1 Based on the total amount as reflected on the Price Schedule and to the supplier as awarded by the SCM delegated authority. GUIDELINE: Wherever reference is made to any Trademark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent". CLAUSE - 2.14.1 & 2.15 Provide, on request by the CCT, any other material that has a bearing on the quotation offer, the suppliers commercial position (including joint venture agreements), preferencing arrangements, or samples of materials considered necessary by the CCT for the purpose of the evaluation of the quotation. If the Specifications require the supplier to provide samples/technical data sheets, these shall be provided strictly in accordance with the instructions set out as follows: 1. If such sample pictures /technical data sheets are not submitted as required in the bid documents then the bid concerned will be declared non-responsive. The Municipal Bidding Document 6.1 is attached, to be eligible for preference points bidders are required to submit a duly completed, current dated MBD 6.1 document with supporting documents with every RFQ submission, failure to submit will result in zero-point allocation. Please note that the MBD6.1 document is valid a year from date of signature. Failure to comply with the above will result in a zero (0) allocation for preference points. INSURANCE DOCUMENTS: Ensure that all required insurances such as your Public liability, Employers liability or COIDA and motor vehicle insurance are attached and that they are up to date. Tender Link : https://web1.capetown.gov.za/web1/procurementportal/RFQ/Details/324708