Tenders Are Invited For Replacement Of Windows In A Building Located At Rynek 20 In Mikołów

1. The Subject Of The Order Is: Purchase, Delivery And Replacement Of Window Joinery With External Air Vents In The Rynek 20 Building In Mikołów.2. Description Of The Subject Of The Order: 2.1. Purchase, Delivery And Replacement Of Technically Worn-Out Construction Joinery With Wooden Windows With A Total Area Of ​​Approx. 24.5 M2. The Window Joinery Area Given Above Is Only An Estimated Value, The Contractor Will Make Detailed Measurements After Signing The Contract. 2.2. Purchase, Delivery And Installation Of 14 External Air Vents (One Vent Per Window) 2.3. The Scope Of Work Includes: A) Transport Of Windows To The Installation Site B) Disassembly Of Old Windows) Installation Of New Windows D) Plastering Works Related To The Repair Of Internal And External Jambs) Double-Layer Gypsum Plaster Of Internal Jambs F) Painting Of Internal Jambs G) Purchase Of All Materials Necessary For Execution Ordersh) Removal Of Old Windows And Debris And Placing Them In A Landfilli) Cleaning And Accompanying Works Related To The Implementation Of The Taskj) Installation Will Not Include Window Sills 2.4. The Contractor Will Carry Out Accurate Measurements Of The Construction Joinery At The Address, Which Will Be The Basis For Its Replacement, After Prior Arrangement Of The Date With The Ordering Party And The User.2.5. Delivery Of Windows As A Finished Product To The Installation Site. 2.6. Dismantling Used Construction Joinery In A Proper Manner That Does Not Cause Excessive Damage To Wall Coverings And Other Materials. Proper Protection Of The Place Of Replacement Of Construction Joinery Inside And Outside The Premises.2.7. Installing Windows Using Mounting Anchors And Low-Pressure Foam. Adding Plaster Strips On The Jambs And Façade, Adjusting The Joinery.2.8. Applying Gypsum Plasters Inside The Jambs.2.9. Painting The Jambs Inside.2.10. Installation Of Outdoor Air Vents Ensuring Air Exchange In The Room 2.11. The Dismantled Woodwork And Debris Should Be Removed On The Day The Windows Are Dismantled. 2/12. Cleaning And Tidying Up The Rooms And Area After Completion Of The Works Within The Scope Of The Works Being Carried Out.2.13. The Built-In Joinery Must Have At Least The Features Listed In The Specification For The Execution And Acceptance Of Works Constituting An Annex To Swz.3. All Materials Used To Perform The Work Should Have The Appropriate Certificates, Approvals And Approvals For Use In Construction Required By Applicable Law. The Contractor Will Always Present Documents Confirming The Above At The Request Of The Supervision Inspector. 4. A Detailed Description Of The Subject Of The Order Is Included In The Technical Specification For The Execution And Acceptance Of Works Constituting Annex No. 7 To Swz.5. The Contractor Will Provide Management With Appropriate Construction Qualifications And Qualified Staff For The Duration Of The Works Covered By The Subject Of The Order.6. The Contractor Is Obliged To Complete The Order On The Terms And Conditions