Request For Quotation State Procurement Of Household Goods.

The Vvg 5X10 Cable Is A Power Cable With Five Copper Cores With A Cross-Section Of 10 Mm², Designed For The Transmission And Distribution Of Electricity In Stationary Installations At Voltages Up To 0.66 Or 1 Kv (Frequency 50 Hz)., Thermal Insulation Made Of Foam Rubber For Ppr (Polypropylene) Pipes With A Diameter Of 20 Mm Is A Highly Elastic Material With A Closed Cellular Structure. It Prevents Heat Loss, Condensation Formation And Protects Communications From Freezing. Internal Diameter (For Ppr Pipe): 20 Mm., Ppr Tee (Polypropylene) 20×20×20 Mm Is An Equal-Bore Fitting Designed For Branching Or Combining Flows In Cold/Hot Water Supply And Heating Systems. All Three Outlets Are Designed For Welding Polypropylene Pipes With A Diameter Of 20 Mm. Maximum Operating Temperature: Up To +90–95 °C. Nominal Operating Pressure: Up To 25 Bar (Pn25). Material: Static Copolymer Of Polypropylene (Pp-R)., Fasteners For Pipes With A Diameter Of 50 Mm Are Available In The Form Of Plastic Clips Or Steel Clamps. The Products Provide Rigid Or Floating Fixation, Withstand Temperatures From -20 To +90°C And Are Designed For Installation On Pvc Walls Or Ceilings, .Sewer Coupling With A Diameter Of 50 Mm Pvc Is A Connecting Fitting For The Installation Of Non-Pressure Internal Sewage Systems. It Is Used For Reliable And Tight Connection Of Two Smooth Pipes Of The Same Diameter, A Short Concrete Drill With A Diameter Of 8 Mm Is A Standard Accessory For A Hammer Drill, Designed For Installing Dowels And Fasteners. Diameter: 8 Mm Shank Type: Most Often Sds-Plus Total Length: 110 Or 160 Mm, Power Copper Cable Vvg 3X4 (Three Conductors With A Cross-Section Of 4 Mm²) Is Used For Connecting Powerful Stationary Electrical Appliances, Socket Groups And Group Electrical Panels In 220 V Or 380 V Networks. Design: Three Monolithic Copper Conductors With A Cross-Section Of 4 Mm², Insulation And Sheath Made Of Pvc Plastic., Ppr Bends (Polypropylene) With A Diameter Of 20 Mm Are Connecting Fittings For Changing The Direction Of The Pipeline. Bend Angle: 45° Or 90°, Fasteners (Clips) For Ppr Pipes With A Diameter Of 20 Mm Are A Reliable Polymer Holder Designed For Fixing Polypropylene Pipes. It Ensures The Stability Of The Pipeline And Prevents It From Sagging Due To Thermal Expansion., Adapter (Coupling) Ppr With External Thread 20 × 1/2 Is A Combined Fitting Used To Transition From A Polypropylene Pipe (Diameter 20 Mm) To A Threaded Element Of An Engineering System Or Shut-Off Valve (With Internal Thread 1/2 Inch) Diameter Of The Polypropylene Part: 20 Mm Diameter And Type Of Thread: 1/2 Inch, External (Hp) Body Material: Virgin Polypropylene (Ppr) Thread Insert Material: High Quality Brass (Pressed Into Plastic), A 50 Mm Diameter Bend Is A Standard Fitting For Changing The Direction Of Flow In A Pipeline (Internal Sewerage, Water Supply Or Heating)., The Vvg 5X6 Cable Is A Power Copper Wire With Five Cores With A Cross-Section Of 6 Mm² Each. Used Primarily In Three-Phase Networks (380 V) For Connecting Powerful Industrial Equipment, Distribution Boards Or Supplying Power To Private Homes, Sewer Tee 50/50/45° Is A Fitting For Internal Non-Pressure Sewerage, Used For Smoothly Combining Or Branching Pvc Flows, Flexible Corrugated Pipe (Corrugation) With A Diameter Of 20 Mm, Supplied In Coils Of 100 Meters, Is Designed To Protect Wires From Mechanical Damage And Insulate Wiring. External/Internal Diameter: 20 Mm / 14.2–14.9 Mm, A Flat Chisel (Or Chisel-Spade) Is Designed For Cutting Channels, Dismantling Tiles, Removing Plaster And Chiseling Concrete. Shank Type: Selected To Match The Chuck Of Your Hammer Drill. For Light Models (Up To 3-4 Kg) - Sds-Plus (Diameter 10 Mm); For Heavy Professional - Sds-Max (Diameter 18 Mm, A Short Concrete Drill With A Diameter Of 6 Mm Is Most Often Used To Create Holes For Standard Plastic Dowels (For Example, 6X30 Or 6X40) For Self-Tapping Screws. Diameter: 6 Mm Total Length (Short Options): 110 Mm Or 160 Mm Working Length: 50 Mm (For A Total Length Of 110 Mm) Or 100 Mm (For A Total Length Of 160 Mm), . Dowel 6×40 Expansion Dowel 6*52 (Pack Of 100 Pieces) Is A Standard Fastener For Quick Installation. Ideal For Through Fastening Of Lightweight Structures, Profiles And Skirting Boards To Dense Materials., A Half-Bend (Elbow Or Fitting For Changing The Direction Of A Pipeline) With A Diameter Of 50 Mm Is Most Often Used In Internal Sewer Or Pressure Systems. The Main Parameters Depend On The Material. Polypropylene Polyvinyl Chloride (Pvc) - For Free-Flow Sewerage, The 50 Mm Plug Is A Reliable Fitting For Internal Sewage Systems That Blocks Unused Outlets And Protects The Room From Unpleasant Pvc Odors