Request For Quotation Purchase Of Household And Electrical Construction Goods For The Department, According To Technical Regulations. Specifications

Electric Burner For Electric Stoves In The Cooking Shop Of The Canteen For Preparing Food For The Special Contingent Of Institution No. 75 (Ket-0.12/3.0, 1.4-1.6, Size 418X296), According To The Technical Specifications. The Product Must Be Agreed Upon With The Customer., External Socket For Institution No. 75 (Single/Double Technical Specifications To Be Agreed With The Customer), Institution Anchor Clamp No. 75 - For Input Wires Dn 123 For Reliable End Fastening Of Self-Supporting Insulated Sip-4 Wires When Organizing Branches From The Main Line To Subscriber Inputs. The Product Is Used In Overhead Power Lines And Provides Stable Fixation Of Two- Or Four-Wire Wires During Installation And Further Operation. The Clamp Is Installed On Supports Or Walls Using Hooks And Brackets, And Installation Is Greatly Simplified Thanks To The Convenient Removable Bracket. The Design Does Not Require The Use Of Special Installation Tools, Which Speeds Up Installation And Reduces Labor Costs. The Product Is Made Of High-Quality Materials - Steel And Polyamide, Which Ensures Strength, Reliability And Long Service Life. The Dielectric Housing Performs An Insulating Function, Increasing Operational Safety. The Movable Wedges Have A Special Relief That Securely Fixes The Conductor Without Damaging Its Insulation Even Under Significant Loads. The Clamp Is Highly Resistant To Ultraviolet Radiation, Corrosion, Temperature Changes, High Humidity And Other Adverse Climatic Influences. This Makes It The Optimal Solution For Use In Various Operating Conditions. Characterized By High Mechanical Strength, Stable Operation And Long Service Life. The Rated Voltage Is Up To 1 Kv, The Range Of Wire Cross-Sections Is 16–25 Mm². The Minimum Breaking Load Is 3.5 Kn. The Operating Temperature Range Is From -60 To +50 °C, Which Ensures Reliable Operation In Any Climate Zone. Anchor Clamp Dn 123 Is A Reliable And Practical Solution For Safe And Durable Installation Of Sip Lines., Accessories For The Department Container (Profiled Steel Sheets - Side, End, Roofing 70 M2 (Stamped/Corrugated), Thickness 1.5–3 Mm For Roofs And Sides, For Sealing And Lining Inside, Moisture-Resistant Plywood 13 M2 - For Repairing And Replacing Damaged Floors, According To Technical Specifications., Flush Tank For The Genoa Bowl For Institution No. 75 Is A Component Of The Plumbing System That Is Used To Collect And Remove Wastewater From The Fountain Bowl. The Material Of The Tank Is Sanitary Porcelain, White Color. It Is Usually Located Underground And Connected To The Bowl Of Genoa By A Pipeline. The Flush Cistern For The Genoa Bowl Usually Consists Of A Plastic Or Metal Container Containing A Valve That Opens When The Water Is Flushed. The Product Must Be Agreed Upon With The Customer., Corrugation For Institutional Sink No. 75. The Supplier Warrants That The Goods Supplied Are New, Unused, And Free From Defects. In Case Of Delivery Of Low-Quality Goods Or Those That Do Not Meet The Customer’S Requirements, The Supplier Is Obliged To Replace The Goods At No Cost To The Customer. The Product Must Be Agreed Upon With The Customer, Branch Piercing Clamp P4x-150 (25-150/25-150) For Institution No. 75, Sip-4 4X16 - Self-Supporting Insulated Wire With 4 Aluminum Cores With A Cross-Section Of 16 Square Millimeters, Insulated From Light-Stabilized Cross-Linked Polyethylene For Institution No. 75, Street Lighting Luminaire For Institution No. 75. Console Shape 150W 6500K Ip65 For Institution No. 15, According To Technical Specifications. It Is Necessary To Agree On The Product With The Customer