Tenders Are Invited For Renovation Of Road No. 1234O Dw No. 420 - Rozumice - Ściborzyce Gr. Countries On The Section From Rozumice To Dw 420

Subject Of The Construction Purpose The Subject Of The Construction Intention Is The Renovation Of A District Road For The Task Entitled: Renovation Of Road No. 1234 On The Dw No. 420 - Rozumice - Ściborzyce State Group Section From Rozumice To Dw 420. Scope, Type And Description Of The Works Conducted The Construction Project Includes The Renovation Of The District Road On The Section From Rozumice To Dw 420 For The Task Entitled: Renovation Of Road No. 1234O On The Dw No. 420 - Rozumice - Ściborzyce State Border Section From Rozumice To Dw 420. The Scope Of The Task Includes The Construction Of A New Road Surface After Milling The Existing Layer And The Construction Of Surface-Hardened Roadsides Made Of Milled Clay. The Top Layer Of The Road Will Be A New Asphalt Carpet Made In Two Layers, Respectively: • Wearing Course Made Of Mineral-Asphalt Mass 8 Cm Thick; • Leveling Layer Made Of Mineral-Asphalt Mass . 3 Cm; The Scope Of The Designed Works, The Solutions Used And The Adopted Construction Layers Are Presented In Figures D-2 To D-3. Figures D-4 And D-5 Show The Structural Cross-Section Of The Existing Road. Possible Adjustments Of All Road Devices That May Appear After Milling The Asphalt Layer Are Planned. On The Section Where The Road Renovation Is Planned, There Are Existing Drainage Ditches Which Are Not Covered By The Renovation. The Road Drainage Will Be Carried Out On The Surface To The Existing Ditches As Before. The Planned Renovation Will Restore The Original Condition Of The Road, And The Use Of Newer, Proven Building Materials Compared To Those Originally Used Will Allow Maintaining The Appropriate Technical Condition Of The Road Section In Question In Terms Of Use. A Detailed Description Of The Subject Of The Order Is Included In The Annex To The Swz. Equivalence: If The Documentation Uses Proper Names, Catalog Numbers, Manufacturers, Trademarks In Relation To Materials, Devices Or Technologies, They Should Be Treated Only As The Minimum Expected Parameters. The Ordering Party Allows Equivalent Solutions, But They Must Have The Same Or Better Technical And Quality Parameters. The Contractor Is Then Obliged To Demonstrate That The Materials, Devices Or Technologies Used By Him Meet The Expectations Specified By The Ordering Party By Submitting Appropriate Documents, Calculations, Opinions, Etc.