Tenders Are Invited For Construction Of Bicycle And Pedestrian Paths As An Element Of The Lidzbark Warmiński Communication System.

1. The Task Involves The Construction Of A Pedestrian And Bicycle Path On Plot No. 9/61, 9/35, 9/59, District 6, Plot No. 23/1, District 5, Plot No. 1/7, 3/4, District 4, Together With Road Infrastructure, I.E.: Street Lighting Of The Pedestrian And Bicycle Route, Active Pedestrian Crossings And Crossings For Cyclists, As Part Of The Implementation Of The Investment Task Entitled: Construction Of Bicycle And Pedestrian Paths As An Element Of The Communication System Of Lidzbark Warmiński.2. Task Co-Financed By The European Regional Development Fund Under The Regional Program European Funds For Warmia And Mazury 2021-2027, Priority 3: Urban Mobility, Measure Fewm.03.03 Urban Mobility - Iit (Recruitment No. Fewm.03.03-Iz.00-002/25),3. The Scope Of Works (Construction Industry) Specified In The Design Documentation Constituting Annex No. 11 To The Swz Includes, Among Others, The Following: 1532.84 M. The Grade Line Should Be Laid On The Existing Terrain, Maintaining A One-Sided Transverse Slope Of 2%. • Construction Of The Pedestrian And Bicycle Path Surface: A Mixture Of Sand, Gravel And Clay In The Proportion Of 1:1:1 Gr. 7 Cm Base: Mechanically Stabilized Crushed Aggregate 0/31.5 Mm Thick. 15 Cm Drainage Layer: Aggregate 0/63 Mm Thick. 10 Cm The Surfaces Should Be Limited With A Concrete Edge Measuring 8X30 Cm And At The Junction Of The Existing Bituminous Road Surface With The Designed Bicycle Path (Pedestrian Crossing And Cyclist Crossing), A 15X30 Cm Concrete Curb Should Be Placed On A Regular Concrete Footing Made Of C12/15 Concrete, Embedded In The Road Level. Summary Of The Area Of The Pedestrian And Bicycle Path: 668.71 M2• Surface Structure Of The Pedestrian And Bicycle Path With A Reinforced Surface: Geosystem G4 Grid, Thickness. 4 Cm, Holes Filled With A Mixture Of Sand, Gravel And Clay In The Proportion Of 1:1:1  Sand Sprinkled Thick. 4 Cm Base: Mechanically Stabilized Crushed Aggregate 0/31.5 Mm Thick. 20 Cm Drainage Layer: Aggregate 0/63 Mm Thick. 15 Cm The Surfaces Should Be Limited With A Concrete Edge Measuring 8X30 Cm On A Concrete Footing With C12/15 Concrete Support, And At The Connection Of The Existing Bituminous Road Surface With The Designed Bicycle Path (Pedestrian Crossing And Cyclist Crossing), A 15X30 Cm Concrete Curb Should Be Placed On An Ordinary Concrete Footing Made Of C12/15 Concrete Embedded In The Road Level.  Summary Of The Area Of The Pedestrian And Bicycle Path With A Reinforced Surface: 5292.81 M2b) Square With Small Architectural Elements:• The Task Should Include The Construction Of A Square Equipped With Small Architectural Elements, Such As Benches, Waste Bins And Bicycle Racks (Covered Bike And Ride), Located In The Immediate Vicinity Of The Bicycle Path With An Area Of 28.40 M2.C) Renovation Of The Viaduct: • As Part Of The Investment, Renovation Should Be Carried Out A Viaduct Located On The Route Of The Pedestrian And Bicycle Path Described In The Annual Periodic Inspection Report Attached T