Quotation Are Invited For Replacement Of Existing Cci Control Valve

Quotation are invited for Replacement of Existing CCI Control Valve Hp/Mp Control Valve Replaceme 1032602484 1 ITEM-00001 REPLACEMENT OF EXISTING CCI CONTROL VALVE 8# X12# BWE ANSI B 16.25 AT K - STATIONS IN #JEBEL ALI POWER STATION#SCOPE OF WORKTHE CO NTRACTOR UPON RECEIVING THE WORK PERMIT SHALL FIRST ENSURE A SAFEWORKING CONDITION BY CHECKING THE LINE ISOLATION AND PROPERDEPRESSU RIZING OF THE LINE. ANY MINOR NECESSARY HELPS TO ISOLATE &DE-ISOLATE THE LINE SHALL BE EXTENDED BY THE CONTRACTOR ON A GOOD WILLTO A VOID DELAY OF WORK.THE CONTRACTOR SHOULD BRING THE NOTICE TO DEWA IF SCAFFOLDING ISREQUIREDCONTRACTOR SHALL ARRANGE INSULATION REMOV AL AND REFIXING OF THE PIPELINEIF REQUIREDANY TEMPORARY SUPPORTS FOR LOCKING OF PIPE IF REQUIRED TO AVOID SHIFTINGOF PIPELINE WHILE THE 8# X12# CCI CONTROL VALVE AND 2 # WATER VALVE ISREMOVED TO BE CARRIED OUT BY THE CONTRACTOR.OLD 8# X12# AND 2 # WATER VALVE 1 LS CCI CONTROL VALVE WAS MARKED AND CUTTINGTHE SAME WAS LIFTED AND SHIFTED FROM ITS PLACE. THEN THE 8# X12# CCICONTROL VALVE AND 2 # WATER VALVE SHALL BE TRANSPORTED BY CONTRACTORMEANS TO A CONVENIENT PLACE DECIDED BY DEWA.TAKE ALL NECESSARY MARKING OF THE PIPELINE AND B OTH SIDE PIPE EDGEPREPARATION SHALL BE DONE AND ENSURING THAT THE HEAT AFFECTED ZONE (OFTHE OLD WELD) TO BE REMOVED BY GRINDINGD.P T EST SHALL BE CARRIED OUT ON PIPE ENDS IF NECESSARY / DEWA#SINSTRUCTIONTHE NEW 8# X12# CCI CONTROL VALVE AND 2 # WATER VALVE SHALL BE SUPPLIEDBY DEWATHE NEW 8# X12# CCI CONTROL VALVE AND 2 # WATER VALVE TO BE LIFTED ANDFIXED IN POSITION, ROOT WELDING TO BE CARRIED OUT BY TIG WELDING AND D.PTEST / RADIOGRAPHY TO BE CARRIED OUTFILLING AND FINAL WELDING TO BE CARRIED OUT BY ARC WELDING AS PERMATCH ING WITH VALVE BODY MATERIAL.CONTRACTOR SHOULT GET APPROVAL FROM DEWA ENGINEER FOR WELDING ELECTRODEBEFORE STARTING THE WELDING WORK .AFTER COMPLETION OF WELDING FINAL RADIOGRAPHY ON WELDING TO BE CARRIEDOUT ON BOTH ENDS.BEFORE AND AFTER WELDING WORK HEAT TREATMENT SHOULD CARRIED OUT ( HEATTREATMENT DEWA SCOPE)COTRACTOR SHOUD CO ORDINATE WITH DEWA ENGINEER FOR HEAT TREAT MENT ANDRADIOGRAPHY WOR K FOR TIMELY COMPLETION OF THE JOBREPAIR/REWORK ON ANY DEFECT FOUND IN THE RADIOGRAPHY REPORT SHALL BECARRIED OUT BY CONTRACTORAFTER INSTALLATION OF THE NEW 8# X12# CCI CONTROL VALVE SPECIAL NOTES / INSTRUCTIONS: HP/MP CONTROL VALVE REPLACEMENT AT K STATION CONTACT PERSON - V.KALIYAMOORTHI - 052-9126916 Mail - [email protected] STANDARD TERMS & CONDITIONS 1) Prices should be DDP delivery duty paid at DEWA stores. 2) Quotation to be submitted only in local currency U.A.E Dirhams 3) DEWA Standard payment terms is 30 days credit from the date of acceptance of material 4) No DEWA staff or his or her relatives up to third degree should have ownership or partnership in your company, and your participation in DEWA tenders / RFQs should not constitute a Conflict or perceived Conflict of Interest. Supplier Registration: https://srm.dewa.gov.ae/irj/portal/anonymous/regis Tender Link : https://srm.dewa.gov.ae/sap/opu/odata/sap/ZSRM_RFX_REG_BID_SRV/AttachmentSet(2412601043)/$value