Tenders Are Invited For Scanners – Acquisition And Installation Of M0 Highway Pre-Filter Sensor

Scanners – Acquisition And Installation Of M0 Highway Pre-Filter Sensor. Acquisition Of The Sensors Of The M0 Highway Prefilters By Concluding A Sales Contract, Which Includes Commissioning. Commissioning Includes Installation And Equipment Calibration. Installation Locations: 1. M0 Highway Between Main Road No. 6 - Deák Ferenc Bridge, Right Lane 14+336 Kms 2. M0 Highway Between Ráckevei Duna-Ág Bridge - Csepel Rest Area, Left Lane 20+050 Kms Tasks To Be Performed: 1. Installation, Calibration And Commissioning Of Hswim Weight Sensors In The Casing, Complete Cross Section Per Direction And Location In A Comprehensive Way (Operating / Collector-Distributor, Advanced1, Advanced2 And Advanced3), With A Device (Instrument) That Processes Measurement Results. 2. Installation, Calibration And Commissioning Of Vehicle Identification Systems Covering The Entire Cross-Section In Each Direction And Location (Operating / Collector-Distributor, Advanced1, Advanced2 And Advanced3), Their Integration With The Device (Instrument) That Processes The Measurement Results. 3. System-Level Planning Of The Above Systems (System Plan, Route Plan); 4. Holding Training For Operator And Maintenance Personnel A Total Of 3 Times: • Operator Online: 1 Time 2 Hours For A Total Of 10 People; • On-Site Technician (Maintenance) 1 Session Of 6 Hours For 4 People, • Online Technician (Maintenance) 1 Session Of 2 Hours For 4 People. The Condition For The Effectiveness Of The Road Inspection Is That Only Critical Vehicles Are Selected And Inspected For The Purpose Of The Inspection, For Example Those For Which There Is A Well-Founded Suspicion Of Overweight And/Or Oversized Traffic. The Pre-Screening Of Vehicles Is Provided By Equipment That Ensures The Measurement Of The Weight And Size Of The Vehicles, The Axle Arrangement, The Identification Of The Vehicles (Registration Number And Nationality), As Well As The Complex Management Of This Data And The Transmission Of The Measurement Results To User Systems. Parts Of The Complex System (High-Speed In-Flight Inspection): 1. Weighing Meters And Instruments Built Into The Casing As A System (Hswim); 2. Vehicle Identification (Overview And License Plate Image Creation, License Plate, Nationality Recognition, Identification, Determination); 3. It And Electronics Background. Importantly, The New Sensors, Vehicle Identification Devices And Instruments Must Work Together As A System. A Complex Weighing And Vehicle Identification System Must Be Implemented. On The M0 Highway, At The Above Locations And Directions, The Vehicle Pre-Filter And Selection System Must Be Designed In Such A Way That It Fully Performs The Weight And Length Control And Vehicle Identification Of All Vehicles And Vehicle Assemblies (Hereinafter Referred To As Vehicles) Traveling In The Given Cross-Section. Heavy Goods Vehicles Using Lanes In The Same Direction At The Same Time, I.E. Vehicles That Bypass The Control System And Partially Drive Into Another Traffic Lane, Must Be Detected And Identified By The System, And Regardless Of The Measured Values, The Vehicle Must Be Classified As Critical. The System Calibrates Itself Regularly And Automatically (Without External Intervention), Its Influencing Factors (E.G. Temperature, Device Obsolescence, Casing