Tenders Are Invited For Laboratory Furniture – A System Of Boxes For The Installation Of Additive Sla And Fdm Technologies For Prototype Production Ii.

Laboratory Furniture – A System Of Boxes For The Installation Of Additive Sla And Fdm Technologies For Prototype Production Ii.. The Subject Of Delivery Is A Set Of Three Boxes Intended For The Installation Of 3D Printers And Related Technologies, Supplemented By A Storage System For Long-Term Storage Of Filaments In Controlled Conditions. Each Of The Boxes Will Be Structurally Adapted For The Safe Operation Of Sla Or Fdm Technology, Especially In Terms Of Effective Capture, Filtering Or Removal Of Vapors Generated During Printing And Subsequent Curing. The Boxes Must Be Suitable For Working With Materials That Generate Vocs (Volatile Organic Substances) And Must Ensure Their Capture Or Drainage So That The Hygienic Limits Of Exposure In The Workplace Are Not Exceeded. If It Is Relevant With Regard To The Suppliers Technical Solution, The Construction Of The Boxes Must Allow Connection To The Exhaust Pipe (See Appendix No. 7 Of The Tender Documentation – Drawing D.1.4.3A Air-Conditioning). In Such A Case, The Offer Must Contain A Complete Extraction Solution, Including The Design And Supply Of Piping, Hoods Or Other Extraction Elements And Any Filtering Or Ventilation Devices That Are Not A Direct Part Of The Boxes. The Delivery Also Includes A Storage System For Accessories Necessary For The Operation And Maintenance Of Printing Equipment, Including Equipment For Handling Resins And Other Auxiliary Tools. The Scope Of Delivery Also Includes Transport To The Installation Site, Installation Of The Equipment And, Depending On The Technical Solution, Connection To The Air Conditioning System And Verification Of The Functionality Of The Entire System. A Detailed Technical Specification Of The Subject Of The Public Contract Is Given In Annex No. 1 Of The Procurement Documentation. The Conditions Of Performance Are Further Specified In The Terms And Conditions (Draft Contract), Which Form Annex No. 2 Of The Tender Documentation.