Request For Quotation 01. Access Control And Management System Equipment. (1) (Z.457) (Z.290)/

Iae. Uninterruptible Power Supply Backup. Line-Interactive Uninterruptible Power Supply. Designed To Ensure Uninterruptible Power Supply To Equipment In The Event Of A Loss Or Deviation Of Network Parameters. Power No Less: 1500 Va / 900 W. Input Voltage: 140 To 300 V Ac. Output Voltage From 220 To 230 V Ac. Frequency From 50 To 60 Hz. The Output Signal Shape Is An Approximated Sinusoid. Switching Time Is No More Than 2 Ms. The Number Of Sockets Is At Least 2. Battery 12 V × At Least 2 Pcs. Battery Capacity Is At Least 9 A/H. Battery Life Is No Less Than 5 Minutes, Battery Charge Is No More Than 8 Hours. Operating Temperature: From 0 °C To +40 °C. Noise Level No More Than 50 Db. Supplied Complete With At Least 1 Power Cable. Gost Iec 62040-1 -2018. Operation Manual; Warranty Card (Warranty Period Of At Least 12 Months). Certificate., Iae. Security Radio Wave Detector. Combined Optical-Electronic Security Detector (Passive Infrared + Microwave/Radio Wave Channel). Designed To Detect Intrusion Into A Protected Premises Based On Movement, Using Two Independent Detection Channels (Ir And Microwave), As Well As For Integration Into Security Alarm Systems And Complex Security Systems. Detection Of Human Movement In A Protected Area. Dual Detection Technology (Ir + Microwave/Fg) To Reduce False Alarms. Signal Analysis With Alarm Confirmation Via Two Channels. Protection Against Interference (Electromagnetic, Light). Control Of Case Opening (Tamper). Generating An Alarm When Motion Is Detected. Possibility Of Integration Into Security Alarm Systems And Access Control Systems. Detection Range Of At Least 10–12 M. Viewing Angle Of At Least 90°. Volumetric Detection Zone. Sensor Type Passive Infrared (Pir) + Microwave (Microwave/Fg). Alarm Output: Relay (Nc/Nr). Power Supply Supply Voltage: 9-16 Vdc. Current Consumption Is No More Than 20–30 Ma. Indoor Installation. Operating Temperature: –10 °C To +50 °C. Relative Humidity: Up To 95% Non-Condensing. Wall Mounting, Installation Height From 2–2.5 M. Two-Channel Signal Processing, Temperature Compensation. Adjusting Sensitivity. Led Indication Of Operating Modes. The Presence Of Protection Against Opening The Case. Compatible With Security Alarm Control And Control Devices. St Rk Iec 62642-2-2-2022. Supplied Complete With A Mounting Kit - At Least 1 Piece. Operation Manual. Warranty Card (Warranty Period Of At Least 12 Months). Certificate., Iae. Cable Brand Kspvg, Voltage No More Than 1,000 V. Fire-Resistant, Flame-Retardant Cable With Reduced Smoke And Gas Emissions. Functional, Technical, Quality And Operational Characteristics: Designed For Transmitting Signals In Fire Alarm Systems, Warning And Evacuation Control Systems (Wec), Automation And Other Systems Operating In Fire Conditions. Number Of Cores/Pairs, No Less Than 4 Pairs (8 Cores), Core Cross-Section No Less Than: 0.5 Mm2. The Core Material Is Copper, The Core Type Is Single-Wire. Fire Resistance Of At Least 30 Minutes. The Insulation Material Is Fire-Resistant (Mica-Containing). Shell Material: Frlsltx (Low Smoke And Gas Emissions, Low Toxicity). The Outer Diameter Of The Cable Is From 7.0 To 10.0 Mm. Operating Temperature From −40 °C To +70 °C. Installation Temperature From −10 °C To +50 °C. Bay Of At Least 200 M. Certificate., Iae. Sleeve For Protecting Welded Joints. Heat-Shrinkable Sleeves To Protect Optical Fiber Welded Joints. Functional, Technical, Operational, Quality Characteristics: Designed To Protect Welded Joints Of Optical Fibers From Mechanical Damage, Moisture And External Influences. They Are Used For Installation And Maintenance Of Fiber-Optic Communication Lines (Focl) In Cross-Panels, Couplings And Distribution Devices. Fiber Fixation Due To Heat Shrinkage; Compatible With Cassettes Of Optical Cross-Connects And Couplings. Type Of Construction - Heat-Shrinkable Sleeve With A Metal (Steel) Load-Bearing Element. The Sleeve Length (Before Shrinkage) Is At Least 60 Mm. Inner Diameter (Before Shrinkage), Not Less Than 2.5 Mm. The Tube Material Is Heat-Shrinkable Polymer. The Strength Element Is A Steel Bar. The Quantity Per Package Is At Least 100 Pieces. Certificate., Iae. A Receiving And Control Device For Controlling Automatic Fire Extinguishing Equipment And Alarms, Designed For Receiving, Processing And Recording Signals From Security And Fire Detectors, Monitoring The Status Of Alarm Loops, Generating Alarm Signals And Transmitting Notifications To A Centralized Monitoring Console, As Well As For Integration Into Complex Security Systems. Monitoring The Status Of Security And Fire Alarm Loops. Reception Of Signals “Alarm”, “Fire”, “Fault”. Event Registration And Storage In Non-Volatile Memory. Transmission Of Notifications To The Central Monitoring Console. Monitoring Communication Lines For Breaks And Short Circuits. Support For Various Types Of Detectors (Security, Fire, Combined). Light And Sound Indication Of States. Control Of Case Opening (Tamper). Possibility Of Integration Into Dispatch And Monitoring Systems. Number Of Alarm Loops: At Least 20. Types Of Loops: Security, Fire, Combined. The Number Of Connected Detectors Is Determined By The Parameters Of The Loops, At Least 20 Zones. Communication Interfaces: Rs-485 (For Integration Into The System). Event Log Of At Least 1000 Entries. Power Supply 220 V Ac. Backup Power From A 12 V Battery. Power Consumption No More Than 30 W. Indoor Installation. Operating Temperature: –10 °C To +50 °C. Relative Humidity Up To 93% Without Condensation. Wall Mounting. Non-Volatile Memory. Led Status Indication. Protection Against Unauthorized Access. Built-In Power Supply (If Available). Possibility Of Connecting External Devices. St Rk 51089-2003. Operation Manual. Warranty Card (Warranty Period Of At Least 12 Months). Certificate., Iae. Patch Panel (Cross-Panel, Patch Panel) Number Of Ports 16. Functional, Technical, Quality And Performance Characteristics: Designed For Termination, Switching And Distribution Of Optical Fibers In Communication Lines, As Well As For Organizing Cross-Connections In Telecommunication Cabinets And Racks. Number Of Ports: At Least: 16. Types Of Connectors: Sc, Installation Type: 19″ Rack Mount. Height Not Less Than 2 U. Case Material - Powder-Coated Steel. Body Color Black/Grey. Supplied Complete With Adapters (Sc) - No Less Than 16, Sc/Upc Pigtails - No Less Than 16, Cassettes For Welding - No Less Than 1 Set, Sleeves For Welding - No Less Than 1 Set, Mounting Kit - No Less Than 1 Pc. Operation Manual. Warranty Card (Warranty Period Of At Least 12 Months). Certificate.