Request For Quotation Products Of The Heating Engineering Department

Brass Coupling Check Valve Dn50. It Is Used As A Shut-Off Valve In Drinking And Industrial Water Networks, Preventing The Reverse Flow Of Liquid In The Pipeline. Working Medium Temperature Up To 120 ℃, Nominal Pressure 1 Mpa, Material - Brass, Supply Valve Seal - Rubber. Thread Vn-Vn 2 Gost 33423-2015, Pressostat. Connection G 1/2 Pressostat Type Kpi 35 (For Heat And Water Supply Systems). Connection 1/2 Adjustment Range 0.2 - 8 Bar; Working Medium: Water, Air, Oil. Gost 26005-83, Ball Valve, Brass, One-Piece, Dn-32, Female-Female, 11/4, Is Intended For Installation As A Shut-Off Device On Pipelines Of Cold And Hot Water, Steam And Other Liquids And Gases That Are Not Aggressive To The Material Of The Body And Seals. The Shut-Off Element Is A Ball, The Ball And Stem Seal Is Fluoroplastic, A Butterfly Handle Or Lever Gost R 59553-2021, V-Belt Spa 1262 Lp. Rubber V-Belt For Drive In All Branches Of Mechanical Engineering. The Width Of The Upper Part Of The Belt, Mm -12.7. Belt Height, Mm -10. Estimated Length, Mm - 1262 Gost 1284-89, Solenoid Valve Dn50. Direct Acting Solenoid Valve, Normally Closed. Working Medium - Air, Gas, Water, Light Oils. The Maximum Temperature Of The Working Environment Is 120° C. The Maximum Pressure Is 11 Bar. Housing Material Brass Connection To Pipeline Pipe Thread Coil Voltage 220V Gost 22413-89, V-Belt Spa 1250 Lp. Rubber V-Belt For Drive In All Branches Of Mechanical Engineering. The Width Of The Upper Part Of The Belt, Mm -12.7. Belt Height, Mm -10. Estimated Length, Mm - 1250 Gost 1284-89