Request For Quotation Purchase Of Cables And Components

Cable Lug Ta 35 For Cable Sip-4 4X35 Quantity – 8 Pcs Delivery Address: Aktobe City, Dzhambula Street, 4 Cable Lugs For Wire Sip-4 4 × 35 (Where The Core Cross-Section Is 35 Mm²) Are Used For Reliable And Hermetically Sealed Termination Of Aluminum Cores When Connecting To Machines, Buses Or Equipment. Main Characteristics And Types Of Tips • Sleeve Material: Aluminum, Aluminum-Copper Or Tinned Copper Tips. • Installation Method: Crimping. • Operating Voltage: Up To 1 Kv. Properties Of Sealed Tips (Bat / Cptau): • The Internal Cavity Is Filled With A Special Contact Lubricant That Protects The Metal From Oxidation. • The Presence Of An Insulating Polymer On The Shank, Resistant To Ultraviolet Radiation And Weather Conditions. • The Color Marking Of The Sealing Ring For A Section Of 35 Mm² Is Red. Gost 7386-80, Technical Specification For Cable Sip-4 4X35 Quantity – 420 Meter, Solid Delivery Address: Aktobe City, Dzhambula Street, 4 Self-Supporting Insulated Wire (Without A Separate Supporting Core) Sip-4 4X35 Is A Four-Core Wire With A Cross-Section Of 35 Mm² With Aluminum Conductors And Insulation Made Of Cross-Linked Polyethylene, Black. It Is Used To Make Branches From Overhead Power Lines (Vl) To The Input, As Well As For Laying Along The Walls Of Buildings And Structures The Wire Is Highly Resistant To Ultraviolet Radiation And Ozone Due To Special Light-Stabilized Insulation. The Design Does Not Include A Separate Support Cable; All 4 Wires Are Conductive And Equally Participate In The Suspension. They Are Used For Laying Main And Linear Overhead Power Lines With Voltage From 0.6 To 1 Kv. Basic Electrical Characteristics • Number Of Cores: 4 • Brand: Sip • Core Material: Aluminum • Core Cross-Section: 35 Mm² • Rated Voltage: 0.6 / 1 Kv (At 50 Hz) • Permissible Current Load: Up To 115 A – 160 A • Maximum Transmitted Power (At 380V): Up To 99 Kw • Electrical Resistance Of 1 Km Of Core: No More Than 0.868 Ohm (Dc At 20°C) • Permissible Short Circuit Current (1 Sec): 3.2 Ka • Wire Diameter: From 22 To 23.5 Mm (External Dimension) • Weight Of 1 Km Of Wire: From 518 To 557 Kg • Operating Temperature: -60°C To +50°C • Maximum Permissible Core Heating: +90°C (Long-Term) And Up To +250°C (With A Short Circuit Of Up To 5 Sec) • Allowable Bending Radius: At Least 10 Outer Diameters (About 220 - 230 Mm) • The Presence Of Markings On The Cable Itself (It Is Embossed Or Printed Every Half Meter Or Meter). It Must Indicate: Name Of The Plant (Or Trademark) - Sip-4 - Number Of Cores X Cross-Section - Operating Voltage - Year Of Manufacture • Service Life: At Least 40 Years Eaeu Is Gost 31946-2012., Intermediate Clamp Zps For Cable Sip-4 4X35 Quantity – 4 Pcs. Delivery Address: Aktobe City, Dzhambula Street, 4 Intermediate (Supporting) Clamps Are Linear Fittings Designed For Hanging And Fixing An Insulated Wire Or A Load-Bearing Neutral Of An Sip On Straight Sections Of Overhead Lines And On Corner Supports. They Provide Reliable Cable Retention, Preventing It From Fraying And Falling. For Sip-4 Wires (Where All Cores Carry The Load Equally And There Is No Dedicated Neutral), Supporting Clamps Are Used That Secure The Entire Bundle. Intermediate Clamps Of The Zps Series Are Designed For Hanging Insulated Wires With Voltage Up To 1 Kv On Intermediate Supports Of Self-Supporting Sip Systems. They Can Also Be Used For Sips With An Isolated Carrier Neutral. Zps Clamps Can Be Used On Corner Supports Up To 90°. The Clamps Are Made Of Hot-Dip Galvanized Steel, And The Plastic Parts Are Made Of Polymers That Are Resistant To Ultraviolet Radiation And Weather And Climatic Factors, Which Ensures The Performance Of The Products For 40 Years. The Products Are Equipped With Shear Bolts That Ensure Reliable Fixation Of The Conductors In The Cl Also, If Necessary, The Products Can Be Dismantled Due To The Presence Of Collapsible Bolt Heads. Basic Markings And Characteristics Zps 4X16-35 (Supporting Clamp For Sip-4) Is The Most Common Marking. Construction: Housing Made Of Plastic, Resistant To Ultraviolet Radiation And Frost. The Wires Are Clamped With An Adjustable Strap Or Bolt Clamp. Gost 31946-2012, Anchor Tension Clamp For Cable Sip-4 4X35 Quantity – 5 Pcs Delivery Address: Aktobe City, Dzhambula Street, 4 Tension Clamps For Reliable And Safe Installation Of The Sip-4 4×35 Cable, Which Rigidly Fix The Wire Without Damaging The Insulation. Anchor Clamps Of The Zas Series Are Designed For Fastening Self-Supporting Insulated Wires With Two, Three Or Four Cores With Voltage Up To 1 Kv On Hooks And Brackets. • Core Cross-Section: From 16 To 35 Mm² (2 Or 4 Wires Each) • Breaking Load: Not Less Than 8.5 - 10 Kn (Kilonewtons) • Climatic Range: -60°C To +55°C • Housing Material: Weatherproof Thermoplastic, Uv Resistant Or Aluminum Alloy • Wedge Material: Glass Fiber Reinforced Polyamide, Gost 31946-2012