Tenders Are Invited For Reconstruction Of District Road No. 1218O In Mokre

The Main Scope Of The Construction Project Includes The Construction Of A New Road Surface After Milling The Existing, Degraded Bituminous Layer. The New Asphalt Carpet Will Be Made In Two Layers With A Total Thickness Of 9 Cm, Which Consists Of A Wearing Course Of The Sma16 Jena Pmb 45/80-55 Mineral-Asphalt Mass, 6 Cm Thick, And A Leveling/Binding Layer Of Ac 11W 50/70 Mass, 3 Cm Thick. The Task Also Included The Construction Of Hardened Roadsides Made Of Milled Clay And Field Stone, As Well As The Laying Of Gutters Made Of Field Stone In Sections. The Order Also Provides For The Renovation Of Entrances To Neighboring Plots And Adjacent Municipal Roads, As Well As The Vertical Adjustment Of All Devices Located In The Road, Which Will Become Visible After Milling The Old Asphalt. In Terms Of Area, The Investment Includes Laying An Asphalt Road On An Area Of ​​Approximately 7,207.31 M², Construction Of Roadsides And Exits From The Reclaimed Area On An Area Of ​​Approximately 1,773.46 M², Laying Asphalt On The Entrances With An Area Of ​​Approximately 67.23 M² And Development Of Approximately 319.10 M² Of Area With Field Stones. A Detailed Description Of The Subject Of The Order Is Included In The Annex To The Swz. Equivalence: If Proper Names, Catalog Numbers, Manufacturers, Trademarks Are Used In The Documentation In Relation To Materials, Devices Or Technologies, They Should Be Treated Only As The Minimum Expected Parameters. The Ordering Party Allows Equivalent Solutions, But They Must Have The Same Or Better Technical And Quality Parameters. The Contractor Is Then Obliged To Demonstrate That The Materials, Devices Or Technologies Used By Him Meet The Expectations Specified By The Ordering Party By Submitting Appropriate Documents, Calculations, Opinions, Etc.