Tenders Are Invited For Construction Of A Bicycle Path In The Municipal Road No. 209011P, Długa Street In Wapno, Stage Ii

The Subject Of The Order Is The Construction Of A Bicycle Path In The Municipal Road No. 209011P, Stage Ii, Allowing Pedestrian Traffic At Długa Street In Wapno. This Is The Next Stage Of The Investment Covered By The Final Decision On Building Permit No. 80/25 Of March 27, 2025. The Designed Bicycle Path Is Located On Plot No. 452. The Area Is Covered With Grass And Along The Designed Path There Are Entrances To The Property And Exits To The Fields. Technical Parameters: - The Beginning Of The Designed Section Is Located At Km 0+000, The End At Km 0+521 - Surface Asphalt, 2.0 M Wide - Framed With Concrete Edges. 8/30 - Entrances To The Property Made Of Concrete Blocks. Thick 8 Cm Edged With Concrete. 12/25 - Exits To The Fields From The Municipal Road. Bicycle Repair Stations With Lighting Are Located On The Bicycle Path. Surface Structure: Cycle Path: - Thick Asphalt Wearing Course. 5 Cm - Aggregate Base 0/31.5, Thickness. 15 Cm - Thick Cutting Layer Of Sand. 10 Cm Entrance Structure: - Concrete Pavement Surface. Thick 5 Cm - Cement And Sand Bedding Thick. 3 Cm - Kł Sm Base, Thick. 3 Cm - Thick Cutting Layer Of Sand. 10 Cm Structure Of The Entrance To The Field From The Road Side: - Ac5s Wearing Course, Thick. 5 Cm - Kł Sm Base, Thick. 15 Cm Entrance Structure From The Field Side: - Aggregate Reinforcement - Pipe Culvert, Cross-Section 300 Vertical And Horizontal Markings: - Vertical Markings Were Designed, Mounted On Booms And On A Straight Post - Hand-Painted Horizontal Signs Were Designed. Traffic Safety Markings: - U11a Barrier The Detailed Scope Of The Task Is Included In The Design Documentation Constituting An Annex To The Swz. When Executing The Order, You Should: - Use Friendly Materials Environment, - Reduce Energy Emissions Or Consumption, - Comply With Requirements Regarding Recycling And Waste Management.