Quotation are invited for Supply and Application of Tank Base Sealant for DFO Tank 3A at D-Station. TANK BASE SEALING WORK FOR TANK BOTTOM AT D-STATION DFO 3ATANK DIAMETER IS13560MMSUPPLY & APPLICATION IS IN SCOPE OF CONTRACTOR.CO NTRACTOR TO FOLLOW THE RECOMMENDATIONS OF THE OEM OF THE SEALANT.CONTRACTOR SHOULD VISIT THE SITE TO UNDERSTAND THE SCOPE OF WORK.SC OPE OF WORK:1. DO THE ROUGH GRINDING ON TANK CIVIL FOUNDATION BOTTOMCONCRETE (ONE FEET) FROM ANNULAR PLATE IN SURROUNDING THE TANK.2. APPLY METAL PRIMER (PSC) ONE COAT IN SHELL PLATE ONSURFACE PREPARED PORTION.3. AFTER DRY OF METAL PRIMER, GSC PRIMER ONE COAT TO APPLYAROUND WHOLE TANKS BOTTOM CONCRETE ON PREPARED PORTION.4. NEW FOAM SEAL TO BE INSTAL L IN THE BOTTOM OF THE ANNULARPLATE AROUND THE TANK.5. FLEXIBLE MEMBRANE REINFORCING SHEET TO BE APPLY INSURROUNDING THE BOTTOM OF THE TANK.6. PROVIDE MASKING TAPE WHEREVER SEALANT APPLICATION NOTREQUIRED.7. APPLY TANK BASE SEALANT AN D PAINT (AS REQUIRED) AROUND THEBOTTOM OF THE TANK IN THE SHELL AND CONCRETE BASE.8. CONSUMABLES REQUIRED FOR SEALING TO SUP PLIED BY CONTRACTOR.9. ALL GRINDING WORK ON TANK METAL BASE AND CIVIL FOUNDATION HASTO BE DONE BY CONTRACTOR10. 1 YE AR WARRANTY FOR WORKMANSHIP AFTER WORK COMPLETION.CONTRACTOR SHOULD PROVIDE NASE/COATING INSPECTOR LEVEL-2 INSPECTOR WITHMINIMUM 5 Y EAR EXPERIENCE.-#CONTRACTORS SHOULD VISIT THE SITE TO UNDERSTAND THE SITE CONDITIONS,CONTRACT SCOPE, AND INTRICACIES OF THE WORK TO ENSURE THAT THEY FULLYUNDERSTAND THE SCOPE OF WORK FOR DESIGN, ENGINEERING, AND COSTESTIMATION. NO CLAIMS FOR EXTRA P AYMENTS SHALL BE ACCEPTED FOR ANYADDITIONAL MATERIALS OR WORKS THAT WERE FOUND REQUIRED AT THE TIME OFEXECUTION OF THE WORK DUE TO L ACK OF UNDERSTANDING OF THE SCOPE, EXTENTOF WORK, PLANT/SITE RESTRICTIONS, UNDERESTIMATION OF THE SCOPE, ETC.,·# IRRESP ECTIVE OF BEING EXPLICITLY OR IMPLICITLY MENTIONEDIN THE RFX SPECIFICATION CONTRACTOR SHALL NOTE, ALL TECHNICAL ANDENGINEERING REQUI REMENTS ESSENTIAL TO COMPLETE THE SCOPE OF WORK AREINCLUDED IN THIS RFX DOCUMENT.·# ANY AMBIGUITIES OR DISCREPANCIES BE TWEEN CONTRACTOR#SOFFER AND THIS TECHNICAL SPECIFICATION AFTER AWARD OF THE CONTRACT SHALLBE RESOLVED BY DEWA, WHO SHALL THEN INSTRU CT THE CONTRACTOR THEREON.INTERPRETATION, CHANGE, OR CORRECTION MADE BY DEWA WILL BE BINDING FORTHE CONTRACTOR IN THIS REGARD WITHOU T ANY ADDITIONAL COST TO DEWA.·## NO CLAIMS FOR EXTRA PAYMENTS SHALL BE ACCEPTED FORDE-MOBILIZATION AND REMOBILIZATION O R WAITING TIME OR IDLE TIME DUE TODEWA#S OPERATIONAL CONSTRAINTS OR OTHER CRITICAL MAINTENANCE ACTIVITIESCARRIED OUT BY DEWA AT THE SITE.·## ## MULTIPLE MOBILIZATION AS PER SITE CONDITIONS.THE TOTAL WORK DURATION IS LIMITED TO 7 CALENDAR DAYS. IF THIS TIM ELINEIS NOT MET, THE PURCHASE ORDER (PO) MAY BE SUBJECT TO CANCELLATION, ANDTHE CORRESPONDING SERVICE PAYMENT MAY BE WITHHELD.WORKIN G HOURS:MONDAY TO THURSDAY: 07:30 TO 16:30FRIDAY: 07:30 TO 12:00DEWA SCOPE:·# SCAFFOLDING / ACCESS STAGING IF REQUIRED. ·## FRESH WATER, AIR, AND ELECTRICITY·# CRANE & FORKLIFT·# PERMITS AND PASSES.·## ISOLATION OF THE SYSTEMCONTACT PERSONS:MOHAMED BINKHADIM:
[email protected] Qty: 1 Supply and Application of Tank Base Sealant for DFO Tank 3A at D-Station Contact Persons:
[email protected] STANDARD TERMS & CONDITIONS 1) Prices should be DDP delivery duty paid at DEWA stores. 2) Quotation to be submitted only in local currency U.A.E Dirhams 3) DEWA Standard payment terms is 30 days credit from the date of acceptance of material 4) No DEWA staff or his or her relatives up to third degree should have ownership or partnership in your company, and your participation in DEWA tenders / RFQs should not constitute a Conflict or perceived Conflict of Interest. Supplier Registration: https://srm.dewa.gov.ae/irj/portal/anonymous/regis Tender Link : https://srm.dewa.gov.ae/sap/opu/odata/sap/ZSRM_RFX_REG_BID_SRV/AttachmentSet(2332601547)/$value
