Tenders Are Invited For Repair Of Municipal Roads Damaged By Flood In 2024.

The Subject Of The Order Is The Performance Of Design Works And Construction Works, Renovation And Reconstruction Of Municipal Roads, Together With The Execution Of Installation Works, Storm Sewage Systems And Accompanying Works. The Subject Of The Order Includes The Preparation Of Multi-Discipline Design Documentation (Land Development Design, Architectural And Construction Design, Technical Design) For The Reconstructed And Renovated Roads Together With Obtaining All Necessary Opinions And Arrangements, Preparation Of As-Built Documentation (Assembly Report) Together With As-Built Surveying Inventory, And Obtaining An Occupancy Permit Or A Certificate Of No Objection To The Notification Of Construction Completion. The Scope Of Design And Construction Works Is Described In The Functional And Utility Program Constituting An Annex To This Swz. The Method Of Carrying Out The Works Is Described In The Ffu. General Description Of The Requirements: 1) Development Of A Multi-Discipline Construction Design (With A Scope Consistent With The Construction Law, With All Obtained Technical Conditions, Decisions, Opinions, Resolutions, Arrangements, Derogations From Technical And Construction Regulations And The Provisions Listed Later In This Functional And Utility Program, With Details In Accordance With The Regulation Of The Minister Of Infrastructure On The Detailed Scope And Form Of A Construction Design, As Well As Obtaining On Its Basis, A Final Decision On A Building Permit And/Or A Certificate Of No Objection From The Authority To Perform Part Of The Works)2) Development Of Executive Designs (Prepared For Each Industry Separately), Technical Specifications For The Execution And Acceptance Of Works, Together With The Authors Supervision Over The Pw In The Scope Covered By The Land Development Project And The Architectural And Construction Design, 3) Obtaining The Required Opinions And Arrangements Necessary To Take Over The Land And Carry Out The Works Based On The Above-Mentioned Documentation,4) Execution Of Construction Works And Accompanying Works In Accordance With Guidelines Provided By The Ordering Party Resulting From This Document And The Executive Documentation Prepared By The Contractor And Obtaining An Occupancy Permit Or Other Equivalent Decision/Certificate, In Accordance With Construction Law.2. Scope To Be Performed Basic Works To Be Performed - The Employer Requires The Contractor To Perform The Number Of Works Indicated Below: • Milling Of Existing Asphalt Surfaces And Its Disposal: 1,780.00 M2 • Construction Of A Crushed Stone Base, Thickness. 20 Cm And Stabilization Thickness. 15 Cm: 2900.00 M2 • Sprinkling The Surface With Emulsion For The Binding And Wearing Course: 4680.00 M2 • Making The Wearing Surface Layer Of Ac11s 50/70 Gr. 5 Cm – 4680.00 M2 • Surface Made Of Mineral-Bituminous Grit Mixtures - Asphalt Binding Layer - Thickness After Compaction 5 Cm - Ac16w Asphalt Concrete, Thickness. 5 Cm – 2900.00 M2 • Placement Of Curbs