Request For Quotation Purchase Of Spare Parts For Specialized Vehicles

Set Of Pipes For The Cooling System On Zil-130, Bearing 180205 Flywheel Support For The Input Shaft Of The Gearbox On Zil-130, Battery 12 W 100 A/H For Zil-130., Oil Seal Packing For Zil-130 Engine., Towing Rope 7 Tons (2 Hooks) For Zil 130, Balloon Wrench 30*32, Air Hose For Coupling + Angle For Zil 433362 (Length 85 Cm). Production Date June 2026, Set Of Pipes For Zil-130 (Radiator Pipe - 2 Pieces, Cooling Pipe, Heater Pipe, Clamps, Radiator Cap, Thermostat, Sealant)., Silumin Recoil Stop For Zil 131, Set Of 2 Pieces., The Fuel Pump (Gasoline Pump) For Zil-130 (Original) Is A Low-Pressure Diaphragm Pump With A Mechanical Drive And A Built-In Lever For Manual Pumping. It Is Designed To Ensure Uninterrupted Supply Of Fuel From The Tank To The Carburetor In The Required Volume And At The Required Pressure. Main Technical Characteristics (B-10 / 130-1106010) Type: Mechanical, Diaphragm. Capacity: At Least 150–180 Liters Per Hour. Zero Supply Pressure: 0.25–0.35 Kgf/Cm² (25 – 35 Kpa). Operating Temperature: From -40°C To +50°C. Operating Life: About 250 000 Km. Drive: From The Camshaft Eccentric Through A Rod (Pushrod) 240 Mm Long. Design Features: Manual Pumping: There Is A Special Lever On The Body That Allows You To Pump Fuel Into The Carburetor Manually If The Car Has Been Standing For A Long Time. Diaphragm: Made From Oil- And Gasoline-Resistant Materials That Are Resistant To Stretching And Temperature Changes. Housing Material: Most Often, Aluminum Alloy, Which Ensures Lightness And Strength Of The Structure. Production Date June 2026, Oil Seal For The Input Shaft Of The Zil-130 Gearbox, Size 42*62*10, Clutch Release Bearing Clutch For Zil-130, Driven Clutch Disc Zil-5301.130 Modernized, Reinforced. The Closed Design Of The Springs Prevents Them From Falling Out During Breakage And Destruction Of The Clutch Drive Disc. Due To The Use Of A 44 Mm Long Hub, Increased Strength And Additional Heat Treatment, Increasing The Safety Factor By 1.5 Times. Installation Of Discs In The Zil-130 Or Zil-Bychok Clutch Does Not Require Any Additional Modifications Or Adjustments. The Use Of Reinforced Damper Springs Creates A Large Margin Of Safety Under Overloads. The Upgraded Disc Ensures Trouble-Free Operation And Prevents Failure Of Expensive Parts And The Clutch. Outer Diameter - 340 Mm, Hub H - 40(44)(51.5) Mm, Spline Dimensions - 1 Ох31 X38х5.9 Mm, Weight - 4.2 Kg, Thickness Of Linings - 10.3 Mm, Transmitted Torque - 82.0 ... 123.0 Kgf.M, Damper Closing Moment -41.0-57.4 Kgf.M