Request For Quotation Purchase Of Electrical Goods.

This 19-Piece Set Of 5% Cobalt Metal Drill Bits Is Designed For Drilling A Variety Of Metal Materials, Including Stainless Steel, Ferrous And Non-Ferrous Metals, And Other Hard Surfaces. Диаметры Сверл В Наборе Варьируются От 1,0 Мм До 10 Мм. Сверла Изготовлены Из Быстрорежущей Стали Hss-Co (5 % Co), Combination Wrench Set With Ratchet Mechanism And Swivel Joint Made Of Heat Treated Chrome Vanadium Steel. For Tightening And Loosening Nuts And Bolts Of Various Sizes. The Set Must Contain At Least 10 Keys Of Sizes 6, 7, 8, 9, 10, 11, 12, 13, 17 And 22 Mm, Set Of 100 Insulating Wire Connectors Designed For Fast, Reliable And Safe Connection Of Single And Multi-Core Wires With A Cross-Section Of 1.0–3.0 Mm². The Body Is Made Of Fire-Resistant Insulating Plastic, Inside There Is A Metal Contact Sleeve That Ensures Good Conductivity, Mechanical Strength Of The Connection, Resistance To Vibration And Prevention Of Contact Oxidation, Ac Axial Fan Designed To Cool A General Electric 160 Kva Uninterruptible Power Supply. Overall Dimensions - No More Than 150X150x55 Mm. Питание — 220–230 В, 50 Гц. Power Consumption - No More Than 87 W. Air Capacity - No Less Than 900 M³/H, Rotation Speed - No Less Than 2700 Rpm. Noise Level - No More Than 70 Dba, Cordless Blower With Cordless 18V Battery Power, No Battery Or Charger Required, Sealed Switching Power Supply 12 V Dc 500 W With A Maximum Output Current Of ≈41.6 A, Designed To Power Led Strips, Lamps, Signs And Other Equipment With 12 V Power Supply, Mounted Distribution Board For Installing Modular Electrical Equipment And Performing Functions Of Distribution And Protection Of Electrical Circuits Indoors; The Design Provides 1 Horizontal Row Of 12 Standard Modules 18 Mm Wide With The Ability To Install Any Modular Equipment; The Body Is Made Of Self-Extinguishing Plastic, Coupling (Connecting). Heat-Shrinkable Connection Sleeve For Screened Three-Core Power Cables With Plastic Insulation And Steel Tape Armor For A Rated Voltage Of 10 Kv, Designed For Core Sections Of 120, 150, 185 And 240 Mm², With A Core Cutting Length Of Approximately 1100 Mm, Includes Mechanical Bolt Connectors For Cores And Screens And Ensures Restoration Of Insulation, Screen And Tightness Of The Connection Point For Indoor And Outdoor Installation, An Analog Measuring Instrument For Determining Indoor Air Temperature, Made With A Dial And A Dial Scale (Usually In Degrees Celsius), Circulation Pump For Heating Systems With A Wet Rotor. Power Supply - 230 V, 50 Hz. Three-Stage Power Regulation, Power Consumption - No More Than 90 W. The Degree Of Protection Is Not Lower Than Ip44, The Insulation Class Is Not Lower Than F. Operating Pressure Is Not Less Than 10 Bar, The Maximum Coolant Temperature Is Not Lower Than 110 °C. Maximum Pressure - No Less Than 6 M, Productivity - No Less Than 3.5 M³/H. The Connection Is Threaded, The Body Is Cast Iron., A Set Of 100 Self-Tapping Screws For Fastening To Metal Profiles Is Intended For Installation Work During The Construction Of Partitions And Suspended Structures Made Of Plasterboard. Self-Tapping Screws With A Diameter Of 3.5 Mm, A Length Of 25 Mm, Black Coating, With A Sharp Tip And Thread Along The Entire Length For Quick Entry Into Metal Up To 1.0 Mm Thick Without Pre-Drilling., A Four-Layer Non-Sterile Medical Gauze Mask Is Made Of Bleached Gauze Of Simple Weave And Is Equipped With Ties For Fixing On The Head; Designed To Filter Inhaled And Exhaled Particles, As Well As Protect Against Viruses And Bacteria In The Air, Coupling (Connecting). Heat-Shrinkable Coupling For Screened Three-Core Power Cables With Plastic Insulation And Metal Armor For A Rated Voltage Of 10 Kv, Designed For A Core Cross-Section Of 70–150 Mm², Includes A Set Of Heat-Shrinkable Insulating Shells And Mechanical Bolt Connectors For Cores And Screens, Ensures Restoration Of Insulation, Screen And Tightness Of The Connection Point For Internal Or External Installation, A Set Of 100 Universal Marking Tags Is Designed For Identification, Marking And Accounting Of Cables, Wires, Equipment And Elements Of Electrical Installations. Tags Must Be Made Of Plastic Or A Combined Paper-Plastic Material, Provide The Ability To Print Alphanumeric Information, Be Resistant To Operation, Convenient For Installation And Maintenance, A Universal Thermostat (Thermostat) On A Din Rail, Non-Programmable, With A Digital Lcd Display, Designed For Automatic Control Of Cable Heating In Heated Floors, Water Floors, Anti-Icing Systems, Boilers, Heaters And Boilers; Is Installed In The Electrical Panel On A Standard Din Rail And Controls The Temperature Through A Complete 5-Meter Temperature Sensor, Supporting An Operating Range From –45°C To +115°C; Executive Relay - “Dry” Normally Open Contact 16A, 250V Ac, Set Of L-Shaped Hex Keys Made Of Durable Chrome Vanadium Steel. For Tightening And Unscrewing Bolts And Hexagon Socket Screws. The Set Includes At Least 9 Keys Of Various Sizes, Electric Heat Gun (Fan Heater) Designed For Heating Rooms And Drying Surfaces During Construction And Finishing Work. Power Supply - Single-Phase Network 220–230 V, 50 Hz. Rated Thermal Power - No Less Than 5 Kw, Maximum Operating Current - No More Than 22 A. Availability Of At Least Three Operating Modes: Ventilation Without Heating - No More Than 0.05 Kw; Partial Heating - At Least 3 Kw; Maximum Heating - At Least 5 Kw. Air Capacity - At Least 400 M³/H., Муфта (Концевая). Heat-Shrinkable Kit For Terminating Three-Core Power Cables With Paper Or Cross-Linked Insulation And A Metal Sheath For A Rated Voltage Of 10 Kv, Designed For Core Cross-Sections Of 70–120 Mm² And Core Cutting Length Of 1200 Mm., Heat Shrink Tube Set, Wall-Mounted Outdoor Floodlight, With A Cast Aluminum Body, Designed For Outdoor Lighting Of Areas, Facades And Open Spaces, Designed For One Metal Halide Lamp With A Power Of 70 W