Profiled Load-Bearing Wall Sheet. Purpose: Intended For Installation Of Roofing Coverings, Wall Fences And Load-Bearing Structures In Construction. Technical Characteristics: Type: Load-Bearing-Wall; Coating: Galvanized; Additional Coating: Painted With Imitation Wood Texture (Equivalent Is Allowed); Color: Imitation Wood; Sheet Length: 6000 Mm; Sheet Width: Not Less Than 1100 Mm; Metal Thickness: Not Less Than 0.45 Mm; Sheet Area: Not Less Than 6.6 M²; Material: Galvanized Steel Profiled Sheet; The Profile Must Provide The Necessary Rigidity And Load-Bearing Capacity., Universal Welded Loop With Ball. Purpose: Intended For Installation On Metal Doors, Gates And Other Structures, Ensuring Their Opening And Closing. Technical Characteristics: Product Type: Welded Loop; Installation Side: Universal; Design: With Ball (Bearing); Permissible Load: Not Less Than 150 Kg; Opening Angle: 180°; Length: 140 Mm; Width: 24 Mm; Material Of Manufacture: Steel; The Product Must Provide Smooth Opening And Resistance To Mechanical Loads., D.40, Hlv 40(11/2) F/F Pn 25, Intended For Water, Coupling Connection Type (Bp/Bp), Full Bore Design, Diameter Dn 40 (1 1/2), Body Material Brass, Handle-Lever Control, Conditional Pressure Pn 25, Minimum Temperature -20 Degrees C, Maximum Temperature 120 Degrees C, Ceramic Floor Tiles (Tiles) 60×60 Cm. Purpose: Intended For Tiling Floors In Residential, Public And Administrative Premises. Technical Characteristics: Product Type: Ceramic Tiles; Application: Floor; Tile Size: 60×60 Cm; Thickness: Not Less Than 9 Mm; Color: White; Tone: White; Design/Texture: Marbled; Gloss Level: Matte; Surface: Anti-Slip; Material Of Manufacture: Ceramics; The Tiles Must Provide Wear Resistance And Resistance To Mechanical Loads Applicable To Floor Coverings., Fastening Clip D.63 Mm For Plastic Pipes, Combed Sanitary Flax For Sealing 200 G, Radiator Fitting Right 1/2 X1 D Pf Rb 555R Adapter Right, Material Galvanized Steel, Size 1M-1/2F, Max Operating Temperature 110 Degrees C, Nominal Pressure 15 Bar, Electric Welded Pipe 89×4.0 Mm. Purpose: Intended For Installation Of Pipelines, Metal Structures, Utility Networks And Construction Work. Technical Characteristics: Product Type: Electric-Welded Steel Pipe; Outer Diameter: 89 Mm; Wall Thickness: Not Less Than 4.0 Mm; Manufacturing Method: Electric Welding; Material: Steel; Compliance With The Requirements Of The Current Gost For Electric-Welded Steel Pipes; The Surface Of The Pipe Must Be Free Of Cracks, Delaminations, Cavities And Other Defects That Impair Performance Characteristics; The Ends Of The Pipe Must Be Cut Evenly.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
