Wall Brackets For Horizontal Installation Of Mesh Tray 160 Mm Aw 15 16 Ft 2L. Standard: Gost Iec 61537:2006 (Tl For The Competence Industrial Automation), Position Switch Plastic Housing According To En 50047, 31 Mm Device Connection 1 X (M20 X 1.5) 1 No/1 Nc Quick-Acting Contacts Integrated Short Stroke Roller Plunger, Form C. 3Se5232-0Fd03. Standard: St Rk Iec 60947-5-1-2014 (Tl For The Competence Industrial Automation), Cable Tie 100X2.5, Pack 100 Pcs. Standard: Gost Iec 62275 (Tl For The Competence Industrial Automation), Tip-Sleeve 0.75Mm2 Per Wire, For Wire Cross-Section - 0.75Mm2, 100 Pcs Per Pack. Standard: Gost Iec 61238-1 (Tl For The Competence Industrial Automation), Flat Ribbon Cable, 7 Cores, Length 5 M. 3Su1900-0Kq80-0Aa0. Standard: Gost Iec 60227-1-2011 (Tl For The Competence Industrial Automation), Cable Tie 200X4, Pack 100 Pcs. Standard: Gost Iec 62275 (Tl For The Competence Industrial Automation), Inductive Proximity Sensor, M8, 24 V Dc. Current, Pnp, No, Cable 2 M. Standard: St Rk Iec 60947-5-2-2014 (Tl For The Competence Industrial Automation), Ethernet Trial Connector Fastconnect Rj45 180 2X 2, Rj45 Connector (10/100 Mbps) With Robust Metal Housing And Fc Connection System, For Ief Cable, 2X2; Cable Outlet 180°. 6Gk1901-1Bb10-2Ae0. Standard: Gost Iec 60603-7 (Tl For The Competence Industrial Automation), Terminal Block Marker For 8Wh9150-0Ca00, Instructions, Labels S.10. Standard: Gost Iec 60445 (Tl For The Competence Industrial Automation), Terminal Sleeve 2.5Mm2 Per Wire, For Wire Cross-Section - 2.5Mm2, 100 Pcs Per Pack. Standard: Gost Iec 61238-1 (Tl For The Competence Industrial Automation), Power Connecting Cable M12-180/M12-180 For Power Supply Of Et 200, Harness Cable With M12 Connector And M12 Socket, L-Coded, 4-Pole, 5 M. 6Xv1801-6Dh50. Standard: Gost Iec 60227-1-2011 (Tl For The Competence Industrial Automation), Terminal, Ipo Plug-In Terminal, Feed-Through Terminal, 2.5 Mm2, Grey. 8Wh6000-0Af00. Standard: Gost Iec 60947-7-1-2014 (Tl For The Competence Industrial Automation), Ferrule-Sleeve 1.5Mm2 Per Wire, For Wire Cross-Section - 1.5Mm2, 100 Pcs Per Pack. Standard: Gost Iec 61238-1 (Tl For The Competence Industrial Automation), Cover For Pass-Through Terminal With Spring Connection, Section: 2.5 Mm2, Width: 2.2 Mm, Color: Grey. 8Wh9000-1Ga00. Standard: Gost Iec 60947-7-1-2014 (Tl For The Competence Industrial Automation), Base And Cover Of Perforated Cable Channel W40xh60xd2000 Mm. Standard: Gost Iec 61084-1 (Tl For The Competence Industrial Automation), Type: Din Rail (Mounting Rail) Standard Ts35, Also Designated Th35 Or Omega Profile (Ω Profile). Dimensions: Width 35 Mm, Profile Height 7.5 Mm, Wall Thickness 1 Mm. Standard Length Is 2 Meters. Material: Cold-Rolled Steel, Galvanized (Galvanized Zinc Coating 8 Microns Thick). The Coating Provides Protection Against Corrosion. Purpose: Intended For Installation Of Modular Equipment In Electrical Cabinets And Panels - Circuit Breakers, Contactors, Terminals, Relays, Power Supplies And Other Equipment With Din Rail Mounting. Execution Options: Available With Perforation (Holes 18×6.3 Mm With A Pitch Of 25 Mm For Fastening With Self-Tapping Screws) And Without Perforation (Smooth). Standard: Gost Iec 60715 (Tl For The Competence Industrial Automation), Double Ferrule-Sleeve 0.75Mm2 For Two Wires, 20 Pcs Per Pack. Standard: Gost Iec 61238-1 (Tl For The Competence Industrial Automation), Sirius Safety Relay Base Unit Standard Series Switching Relay Circuits 3 Normally Open Contacts Plus Relay Signal Circuit 1 Normally Closed Contact Us = 24 V Ac/Dc Screw Terminal. 3Sk1111-1Ab30. Standard: St Rk Iec 60947-5-1-2014 (Tl For The Competence Industrial Automation)
