Tenders Are Invited For Operating Tables – Mobile Op-Tische

Operating Tables – Mobile Op-Tische. The Mobile Operating Tables Offered Must Comply With The Legal Regulations And Recognized Rules Of Technology In The Current Version. These Include In Particular: - Eu Directives 93/42/Eec And/Or Eu Regulation 2017/745 - Din En 60601/80601 Series Of Standards The Following Applies To Medical Electrical Devices: - The Devices Must Work Safely Within The Following Tolerance Ranges - Static Plus-Minus 1%, Dynamic Plus-Minus 10% Of The Mains Voltage. - Static Plus-Minus 4%, Dynamic Plus-Minus 10% Of The Mains Frequency. - The Devices Must Be Designed For A Nominal Voltage Of 230 V, 50 Hz. - After Voltage Dips, Short Interruptions And Power Failures, The Devices Must Automatically Continue Operation With The Originally Set Values. - The Devices Must Not Be Disrupted Or Fail Due To Overvoltages Or Network Interference. The Devices Must Not Be Damaged By A Power Failure. The Availability Of Spare And Wear Parts Must Be Ensured For At Least 10 Years From The Last Delivery Of The Devices. The Scope Of Services Owed By The Contractor Includes The Delivery, Setup, Installation, Assembly, Commissioning And Instruction Of The Mobile Operating Tables Offered. The Contractors Services Must Be Carried Out During Ongoing Clinic Operations. Despite The Introduction Of The Devices, The Clinic Must Continue To Comply With All Necessary Hygiene Requirements In Order To Prevent Damage To The Health Of Everyone Involved. This Requires Compliance With Hygienic Protective Measures. This Affects Not Only The Areas That Are Particularly In Need Of Protection (Operating Rooms, Laboratories, Clean Rooms, Etc.), But Also General Areas With Patient Contact (E.G. Stairwells, Hallways, Etc.).