Quotation Are Invited For 1 Ton Laminated Bulk Bags

Quotation Are Invited For 1 Ton Laminated Bulk Bags Delivery Date: 2026/09/30 Delivery To: Water Services - Bulk Water Tss Maintenance Planning Plant Delivery Address: 38 Blackheath Wtp, Polkadraai Rd, Stellenbosch Farms, Cape Town Closing Date: 2026/07/02 Closing Time: 12:00 Pm Description: 500 Each X 1 Ton Laminated Bulk Bags Specification: * 1 Ton Laminated Bulk Bags 1 Ton Laminated Bulk Bag (Fibc) For Storage And Discharge Of Filter Media / Sand 1 Ton Laminated Bulk Bags 1. General Description Flexible Intermediate Bulk Container (Fibc) Manufactured From Laminated Woven Polypropylene Fabric, Designed For The Storage, Handling, And Controlled Discharge Of Dry Granular Materials Such As Filter Media Or Sand. The Bag Is Suitable For Forklift Or Crane Handling Using Omega Style Lifting Loops. 2. Capacity & Rating Safe Working Load (Swl): 1,000 Kg Safety Factor: 5:1 (Minimum) Design Bulk Density: Up To 1.6 T/M³ Nominal Volume: Approx. 1.0 M³ 3. Bag Construction Bag Type: 4 Panel Or U Panel Fabric: O Woven Polypropylene (Pp) O Ldpe Laminated (Extrusion Coated) O Uv Stabilized, Minimum 200 Hours Fabric Weight: O Base Fabric: 160180 Gsm O Ldpe Lamination: 3040 Micron Color: Negligible 4. Dimensions (Nominal) Length: 900 Mm Width: 900 Mm Height: 900 Mm 5. Top Construction Type: Full Open Top Top Hem: Double Folded And Double Stitched 6. Bottom Discharge Type: Center Bottom Discharge Spout Spout Diameter: 350 Mm (Nominal) Spout Length: 400 Mm Closure: Tie Cords With Dust Flap Seams: Double Stitched And Reinforced 7. Lifting Loops Type: Omega Style Lifting Loops Quantity: Four (4) Material: High Tenacity Polypropylene Webbing Loop Height: 300 Mm Above Bag Top Attachment: Sewn Into Side Seams And Reinforced With Bar Tack Stitching Load Rating Requirement: Each Lifting Loop Shall Be Designed For A Minimum Working Load Of 500 Kg, Based On The Worst Case Assumption That Only Two Lifting Loops May Carry The Full Bag Load During Lifting. Each Lifting Loop Shall Have A Minimum Breaking Strength Of 2,500 Kg, Providing A 5:1 Safety Factor Relative To The Applied Working Load, In Accordance With Iso 21898 Requirements For Fibcs. Loops Shall Be Suitable For Repeated Lifting By Forklift Tines Or Crane Hooks Without Deformation Or Damage. 8. Stitching & Seams Thread: High Tenacity Polyester Stitch Type: Double Lock Stitch Reinforced Areas: O Lifting Loop Attachments O Bottom Spout Connection O Bottom Panel Seams 9. Dust & Moisture Control Laminated Fabric Provides Resistance To Moisture Ingress And Loss Of Fine Particles Needle Holes Sealed By Lamination Under Normal Handling Conditions 10. Safety & Quality Compliance Manufactured In Accordance With Iso 21898 Batch Tested For: O Safe Working Load O Loop Tensile Strength O Seam Integrity Guideline: Wherever Reference Is Made To Any Trademark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "Or Equivalent". Clause - 2.14.1 (>&)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The SupplierS Commercial Position (Including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/Technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /Technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned Will Be Declared Non-Responsive. The Municipal Bidding Document 6.1 Is Attached, To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Every Rfq Submission, Failure To Submit Will Result In Zero-Point Allocation. Please Note That The Mbd6.1 Document Is Valid A Year From Date Of Signature. Failure To Comply With The Above Will Result In A Zero (0) Allocation For Preference Points. Insurance Documents: Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And Public That They Are Up To Date. Tender Link : Https://Web1.Capetown.Gov.Za/Web1/Procurementportal/Rfq/Details/324303

Refer document

FileName	File Description
Global Tender Document	c063cf6a-308b-4ce7-8c8f-92438b242360.html