Tenders Are Invited For Modernization Of The Sports Complex Moje Boisko - Orlik 2012 In Rzeplin

1. The Subject Of The Order Is The Execution Of The Task Entitled: Modernization Of The Existing Sports Complex Moje Boisko Orlik -2012 In Rzeplin Under The Conditions Specified In This Swz And Its Annexes, This Description Of The Subject Of The Order And The Contract Template Constituting Annex No. 6 To The Swz. 2. Investment Task Carried Out As Part Of Co-Financing From The Fund For The Development Of Physical Culture, Administered By The Minister Of Sport And Tourism Of The Investment Task Under The Sports Complexes Modernization Program My Pitch Orlik 2012 - Edition 2025.3. The Orlik Sports Complex Is Located On Part Of The Plots No. Surveyor 83/2 And 84/4, Rzeplino District, Commune. Dolice. 4. Existing Paved Area, Paving Stones, Intended For Cleaning, With An Area Of 124.25 M2 - Clean The Surface Using A Pressure Washer With A Suction Cup Using Appropriate Chemicals Also Intended To Destroy Green Coatings (Scraping Off Moss And Lichen Is Not Recommended, As It May Damage The Structure Of The Material). It Is Also Recommended To Impregnate The Paving Stones By Covering Them With A Preparation That Protects Them Against The Absorption Of Water And Liquid Contaminants.5. Existing Green Area Intended For Repair - Laying A New Lawn With An Area Of 55.00 M2 – Laying Out A New Lawn From A Roll. The Ground Should Be Prepared In Advance By Cleaning The Old Layer Of Turf From Weeds, Stones And Other Residues, Then Dig It Up Manually Or With A Tiller, Pour A Layer Of Light, Permeable Soil, Level It And Fertilize It With Fertilizer, And Spread The New Lawn.6. Existing Sports Field With A Synthetic Grass Surface - Replacement Of The Surface. 1,860.00 M2 - Pitch Surface Made Of Synthetic Grass, 45 Mm High, Green, Filled With Quartz Sand And Recycled Epdm. Tufted Synthetic Grass With Features As Close As Possible To Natural Grass In Terms Of Visual And Usability. The Surface Should Have Two Types Of Fibers: Monofilament And Fibrillated. Required Minimum Parameters:1) Fiber Composition: 100% Polyethylene2) Fiber Type And Cross-Section: Combination Of Min. Two Types Of Fibers In One Bundle, Mix Of Monofilament And Fibril3) Backing: Latex4) Fiber Height Min. 45 Mm5) Fiber Thickness (Monofil): Min. 425 Microns Fiber Thickness (Fibrils): Min. 95 Microns6) Fiber Weight (Dtex) Min. 23.0007) Grass Density Min. 120,000 Fibers/M28) Number Of Tufts: Min. 8.66/M29) Tuft Pulling Force After Water Aging Min. 90N10) Fiber Weight Min. 1950G/M211) Total Grass Weight Min. 3100/M212) Color Min. 2 Shades In One Bunch13) Strength Of Glued Joints After Aging Min. 150N/100 Mm14) Water Permeability For The System: Min. 1100 Mm/H15) Filling: Infil Consisting Of A Layer Of Quartz Sand And A Layer Of Recycled Epdm Rubber Granules In Black In An Amount Consistent With Laboratory Testing. The New Synthetic Grass Surface Should Be Laid In Accordance With The Suppliers Technology On A Base Prepared By The Contractor. The Original Layout Of The Playing Lines Should Be Recreated By Gluin