Quotation Are Invited For Maintenance For Al-Hussien Health Center And Shat Al-Arab (Al-Tannoumah) Health Center Supply, Delivery, Installation, Testing And Commissioning Of A Small Domestic Water Booster Pump Similar To Commonly Used Residential Water Pumps Available In The Local Market, Suitable For Boosting Clean Water Supply Within Buildings. The Pump Shall Have A Power Rating Of Not Less Than 0.51 Hp, Operating Voltage Of 220240V / 50Hz, Equipped With An Energy-Efficient Copper Winding Motor And Automatic Electronic Pressure Controller. The Pump Shall Be Corrosion-Resistant And Supplied Complete With All Fittings And Accessories Required For Direct Replacement Of The Existing Unit Without Additional Pipework. No. 1 Supply And Installation Of Hot And Cold Wash Basin Mixer Taps Manufactured From Chrome-Plated Iron Or Equivalent Corrosion-Resistant Metallic Material Suitable For Intensive Daily Use. The Item Shall Include Flexible Water Connections, Fixing Accessories, Nuts, Washers, Seals And All Materials Required For Replacement, Installation, Testing And Commissioning. No. 6 Supply And Installation Of A Complete Wash Basin Drainage Connection Assembly Consisting Of A Flexible Drainage Hose Not Less Than 50 Cm Long And Extendable Up To Approximately 80 Cm, Standard Basin Drainage Connection Pipe, Seals, Connectors And All Accessories Required For Installation. The Assembly Shall Connect The Basin Outlet To The Existing Drainage Network And Shall Be Manufactured From Durable Recyclable Upvc, Polypropylene, Or Equivalent Corrosion-Resistant Materials. No. 6 Supply And Installation Of Complete Toilet Bidet Spray Sets Including Angle Valve, Flexible Pressure-Resistant Hose, Bidet Spray Head, Wall Bracket, Fittings, Connectors And All Accessories Necessary For Operation. Manufactured From Corrosion-Resistant Materials And Including Replacement, Testing And Commissioning. No. 6 Supply, Delivery, Installation, Testing And Commissioning Of A 3-Ton Floor-Standing Split Air-Conditioning Unit Suitable For Healthcare Facilities. The Scope Includes Indoor And Outdoor Units, Insulated Copper Refrigerant Piping Up To 11 Meters Or As Required, Power And Control Cables, Condensate Drain Piping, Circuit Breakers, Mounting Supports, Accessories, Testing And Full Commissioning. Preference Shall Be Given To Energy-Efficient Units Using Environmentally Friendly Refrigerants. No. 1 Supply And Installation Of A 1,000-Liter Potable Water Storage Tank Manufactured From Food-Grade Polyethylene Or Equivalent Recyclable Environmentally Friendly Material Suitable For Storing Treated Drinking Water. The Tank Shall Be Uv-Resistant, Corrosion-Resistant, Non-Toxic And Supplied Complete With All Required Fittings, Valves And Support Base. No. 1 Supply, Installation And Commissioning Of Two Energy-Efficient Heavy Duty Drinking Water Coolers Complete With All Required Piping, Valves, Fittings And Accessories For Connection To The Potable Water Storage Tank Using High-Quality Ppr Or Hdpe Piping. One Cooler Shall Be Installed On The Ground Floor And One On The First Floor. No. 2 Supply, Delivery, Installation, Testing And Commissioning Of A 2-Ton Wall-Mounted Split Air Conditioner Complete With Insulated Copper Piping, Power And Control Cables, Condensate Drain Piping, Galvanized Steel Outdoor Stand And All Accessories Required For Operation. No. 1 Supply, Delivery, Installation, Testing And Commissioning Of A 2-Ton Wall-Mounted Split Air Conditioner Complete With Indoor And Outdoor Units, Insulated Copper Piping, Electrical Cables, Condensate Drain Pipe, Galvanized Support Stand And All Installation Accessories. No. 1 Supply And Installation Of Small Axial Exhaust Fans Suitable For Toilets And Sanitary Facilities, Manufactured From Moisture-Resistant And Corrosion-Resistant Materials, Complete With Protective Grille, Low-Noise Motor And All Accessories Required For Replacement And Installation On Existing Provisions. No. 8 Supply And Installation Of High-Efficiency Square Exhaust Fans Suitable For Laboratories And Service Rooms, Complete With Low-Noise Motor, Corrosion-Resistant Blades, Protective Grille And All Accessories Required For Installation On Existing Provisions. No. 8 Supply And Installation Of Ceiling Fans Not Less Than 56 Inches In Diameter, Three-Blade Design, Equipped With High-Efficiency Copper Motor And Multi-Speed Regulator, Complete With All Accessories Required For Installation And Operation. No. 5 Supply And Installation Of A Recessed False-Ceiling Fan Suitable For Standard Suspended Ceiling Panels, Complete With Remote Control, Multi-Speed Operation And Replacement Of The Existing Unit, Including Testing And Commissioning. No. 1 Supply, Installation And Commissioning Of Two Energy-Efficient Heavy Duty Drinking Water Coolers Complete With All Required Piping, Valves, Fittings And Accessories For Connection To The Potable Water Storage Tank Using High-Quality Ppr Or Hdpe Piping. One Cooler Shall Be Installed On The Ground Floor And One On The First Floor. No. 2 Supply And Installation Of A 1,000-Liter Potable Water Storage Tank Manufactured From Food-Grade Polyethylene Or Equivalent Recyclable Environmentally Friendly Material Suitable For Storing Treated Drinking Water. The Tank Shall Be Uv-Resistant, Corrosion-Resistant, Non-Toxic And Supplied Complete With All Required Fittings, Valves And Support Base. No. 1 Location: Basra Tender Package Available From: 2026-06-18 Deadline For Offer Submission: 2026-06-24 At 16:00 (Iraqi Time) Tender Link : Https://Www.Ngosjobs-Bids.Com/Index.Php/Bids
