Bids Are Invited For Registration Of Prices For The Eventual Acquisition Of Basic Construction Materials For Continuous, Permanent And Uninterrupted Service To Carry Out Activities Related To The Implementation, Maintenance, Conservation, Renovation, Technical Adaptation And Recovery Of Urban Infrastructure.

Ca-50 Steel - 6.3 Mm (1/4) - Carbon Steel Bar Intended For Reinforced Concrete Reinforcement, Category Ca-50 (Characteristic Yield Resistance F = 500 Mpa Or 50 Kgf/Mm). Ribbed (Corrugated) Surface To Ensure Optimal Adhesion To Concrete., Ca-50 Steel - 8.0 Mm (5/16) - Carbon Steel Bar Intended For Reinforced Concrete Reinforcement, Ca-50 Steel - 10.0 Mm (3/8) - Carbon Steel Bar Intended For Reinforced Concrete Reinforcement, Ca-50 Steel - 12.5 Mm - Carbon Steel Bar Intended For Reinforced Concrete Reinforcement, Ca-60 Steel - 5.0 Mm - Carbon Steel Bar Intended For Reinforced Concrete Reinforcement, Category Ca-60 (Characteristic Yield Resistance F = 600 Mpa Or 60 Kgf/Mm). Ribbed (Corrugated) Surface To Ensure Optimal Adhesion To Concrete., Mechanical Smooth Steel Round Bar (Diameter 25.0 Mm - Approx. 1). Hot Rolled Solid Carbon Steel Bar, Circular Cross Section And Smooth Surface (Without Ribs)., Weatherable Steel (Application: Sheets | Standards: Astm A-588/Nbr-5008) - Weatherable Steel For Sheets, Supplied With Manufacturers Quality Certificate, Containing Minimum Required Chemical Composition And Mechanical Properties., Wire Galvanized No. 14 Bwg, Annealed Wire 18 Bwg, Angle 1 1/4 Hot Rolled Carbon Steel, Hot Rolled Carbon Steel Sheet, Structural Quality, Gauge 3/16, E =4.75 Mm (37.29 Kg/M2), No. 11 Folded Steel Sheet (3.00 Mm), No. 13 Folded Steel Sheet (2.25 Mm), No. 14 Flat Sheet Tray Type (Cut/Folded), Profiled Sheet 1/4, Profiled Sheet 3/16, Profiled Sheet No. 18, Made Of Laminated Carbon Steel, Intended For Structural Or Closing Applications, According To Usual Metal Construction Practices., Scored Sheet No. 14 Tray Type (Cut/Folded), Made Of Laminated Carbon Steel, Mechanically Formed, Intended For The Manufacture Of Trays, Gutters Or Auxiliary Structural Elements., Spacer / Circular Spacer With Side Entry, In Plastic, For Rebar *4.2 To 12.5* Mm, Coverage 20 Mm, Angle Iron 1/8 3/8 (Full), Clamp For 1/4 Steel Cable, Flat French Hand Made Of Galvanized Steel 726 Mm, Metalon 20 75 Mm, H = 200 Mm, L = 75 Mm (9, 94 Kg/M), E = 2, 65 Mm, H = 75 Mm, L = 40 Mm (3, 04 Kg/M), E = 3 Mm, H = 125 Mm, L = 50 Mm (5, 07 Kg/M), Galvanized Steel Top Hat Profile, Used In Light Metallic Structures, Closures, Supports And Auxiliary Elements, With Surface Protection Against Corrosion., *20 Ribbed, Ca-60, Q-196, (3.11 Kg/M2), Wire Diameter = 5.0 Mm, Width = 2.45 M, Mesh Spacing = 10 2 M, Wire 3.4 Mm (10 Bwg), Mesh Wire Mesh 4 Wire 12, Iron Coin Screen, Width 0.50M, Galvanized Steel Tube With Seam, Medium Class, Dn 1.1/4, E = *3.25* Mm, Weight *3.14* Kg/M (