Bids Are Invited For Hiring A Company To Carry Out Construction Work At The Tereza De Lourdes Pimenta Municipal Educational Center, In The District Of Conceição Da Boa Vista, Municipality Of Recreio-Mg, According To Specifications Contained In The Attached Engineering Documents, In Compliance With The Needs Of The Municipal Department Of Education Of Recreio-Mg, Under The Terms Of Exit Agreement No. 1261002272/2026/See

1.1 Rental Of Chemical Toilet, Size (110X120x230)Cm, Standard Line, Containing One (1) Sink/Hand Sanitizer, Including Maintenance And Mobilization/Demobilization, 1.2 Siding With Metallic Tile. Af_03/2024, 2.1 Supply And Placement Of Work Sign Made Of Galvanized Sheet 26, Esp. 0.45 Mm, Plotted With Vinyl Adhesive, Affixed With 4.8X40 Mm Rivets, On Metal Structure Of Metalon 20X20 Mm, Special. 1.25 Mm, Including Autoclaved Eucalyptus Support Painted With Pva Paint Two (2) Coats, 3.1 Manual Excavation For Crowning Block Or Footing (Including Excavation For Placing Formwork). Af_01/2024, 3.2 Manual Excavation For Baldrame Beam Or Footing (Including Excavation For Placing Formwork). Af_01/2024, 3.3 Cutting And Bending Of Ca-60 Steel, Diameter Of 5.0 Mm. Af_06/2022, 3.4 Cutting And Bending Of Ca-25 Steel, Diameter Of 8, 3.5 Cutting And Bending Of Ca-50 Steel, Diameter Of 10, 0 Mm. Af_06/2022., 3.6 Cutting And Bending Of Ca-50 Steel, Diameter Of 12.5 Mm. Af_06/2022., 3.7 Cutting And Bending Of Ca-50 Steel, Diameter Of 16, 3.8 Preparation Of The Bottom Of A Trench With A Width Greater Than Or Equal To 1.5 M And Less Than 2.5 M (Natural Soil Adjustment), In A Location With A Low Level Of Interference. Af_01/2026, 3.9 Formwork And Deformation With Batten Board, With Reuse, 3.10 Supply Of Structural Concrete, Machined, Combined, With Fck 30Mpa, Including Laying, Thickening And Finishing, 3.11 Surface Waterproofing With Asphalt Emulsion, 2 Coats. Af_09/2023, 4.1 Cutting And Bending Of Ca-60 Steel, 4.2 Cutting And Bending Of Ca-50 Steel, Diameter Of 6.3 Mm. Af_06/2022, 4.3 Cutting And Bending Of Ca-25 Steel, 4.4 Cutting And Bending Of Ca-50 Steel, 4.5 Cutting And Bending Of Ca-50 Steel, 5 Mm. Af_06/2022, 4.6 Cutting And Bending Of Ca-50 Steel, 4.7 Formwork And Shaping With Batten Board, 4.8 Supply Of Structural Concrete, With Fck 25Mpa, 5.1 Sealing Masonry Of Horizontally Drilled Ceramic Blocks Of 9X19x39 Cm (Thickness 9 Cm) And Mortar Of Laying With Preparation In Concrete Mixer. Af_12/2021, 6.1 Application Of Plastic Tarpaulin For Execution Of Concrete Pavements. Af_04/2022, 6.2 Subfloor Straightened With Mortar, Mixture 1:3 (Cement And Sand), Esp. 50Mm, Including Mortar With Mechanical Preparation, 6.3 Slab With Mortar, Mixture 1:2:3 (Cement, Sand And Stone), Applied With Spoon, Esp. 5Mm, 6.4 Plaster With Mortar, Mixture 1:6 (Cement And Sand), Esp. 20Mm, Manual Application, Exclusive Chapisco, 6.5 Ca-60 Steel Mesh Reinforcement, Welded Type Q-138, Diameter Ø4, 2Mm, Weft With Dimensions (100X100)Mm, Including Spacer, 6.6 Ceramic Floor Covering With Enamelled Type Plates Of Dimensions 80X80 Cm Applied In Environments Larger Than 10 M². Af_02/2023_Pe, 6.7 Ceramic Skirting Board 7Cm High With Enamelled Plates Dimensions 80X80cm. Af_02/2023, 6.8 Ceramic Coating For Internal Walls With Enamelled Plates Of Dimensions 33X45 Cm Applied To The Entire Height Of The Walls. Af_02/2023_Pe, 7.1 Supply Of Metallic Structure And Metallic Framing, In Steel, For Roof, Exclusive Tile, Including Manufacturing, Transport, Assembly And Application Of Anticorrosive Preparation Base On Metallic Surface, One (1) Coat, 7.2 Roofing With Steel/Aluminum Tile And 0.5 Mm, With Up To 2 Waters, Including Lifting. Af_07/2019, 7.3 Galvanized Steel Sheet Gutter Number 24, 50 Cm Development, Including Vertical Transport. Af_07/2019, 7.4 Rufo In Galvanized Steel Sheet Number 24, 25 Cm Cut, 7.5 Tie In Galvanized Sheet, With Drip Tray, 65Mm (Gsg-24), With Development Of