Request For Quotation Purchase Of Materials For Housekeeping Services

Flocculant (Polyacrylamide, Pam) Purpose: A Flocculant Is A High-Molecular, Water-Soluble Substance (Usually Polyacrylamide) Designed For Accelerated Sedimentation Of Suspended Solids During Water And Wastewater Treatment. Used In Conjunction With Coagulants (For Example, Ferric Chloride) For More Effective Sediment Formation. Technical Parameters: Parameter Meaning Chemical Formula (C₃h₅no)ₙ (Polyacrylamide) Type Anionic / Cationic / Nonionic (Depending On The Task) Appearance White Powder Active Substance Content ≥ 90% Molecular Weight 5 Million G/Mol Dissolution Rate 30–60 Minutes With Stirring Optimal Ph Of Use 6 Packaging: 10 Kg Bags; Applications In Voc And Water Treatment: • Used After Coagulation • Dosage: From 0.1 To 2 Mg/L • Dissolves In Water And Is Dosed Using Dosing Pumps Compliance: • Gost R 51641, Gost 18992 • Sanpin And Snip For Water Treatment And Wastewater Treatment • Approved For Use In Medical And Public Utility Facilities, Mounting Adhesive 310 Ml• Base Material • Synthetic Rubber And Organic Solvents • Purpose • For Heavy-Duty Installation Of Heavy Building Structures, Porous And Non-Porous Materials (Wood, Mdf, Chipboard, Metal, Stone, Pvc) • Finished Seam Color • Beige / Yellowish White • Cartridge Volume • Not Less Than 310 Ml • Initial Grip Force • High (At Least 100-110 Kg/M² For Fixing Heavy Elements Without Additional Fasteners) • Time For Adjustment • From 5 To 10 Minutes • Full Cure Time • No More Than 72 Hours (Depending On Environmental Conditions) • Application Temperature • Possibility Of Application In The Range From -20 °C To +30 °C • Heat Resistance Of The Seam • Operation Of The Finished Joint In The Range From -40 °C To +80 °C • Properties Of The Seam After Drying • Elastic, Moisture-Resistant, Resistant To Vibration And Aging • 2. Packaging And Delivery Requirements • Release Form: Hard Plastic Cartridge For A Standard Construction Gun (Volume Of At Least 310 Ml). • Labeling: Each Unit Of Goods Must Contain Information About The Manufacturer, Date Of Manufacture, Batch Number And Expiration Date In Russian And/Or Kazakh Languages. • Shelf Life: At The Time Of Delivery, The Remaining Shelf Life Of The Product Must Be At Least 12 Months From The Total Shelf Life Of The Manufacturer. • Integrity: The Product Must Be Supplied In Original Factory Packaging To Prevent Damage, Deformation Of Cartridges Or Leakage Of Composition. • 3. Safety And Compliance Requirements • Products Must Be Accompanied By Valid Certificates Of Conformity/Declarations And Safety Data Sheets (Msds). • The Adhesive Must Be Safe For Construction Materials After Complete Evaporation Of The Solvents. Gost 30535-97, Salt For Water Softeners (Bag).Characteristics Of Softener Salt (Softener) Product Name: Tabletted Salt For The Regeneration Of Ion Exchange Resins (Salt Tablets). Purpose: Used For The Regeneration Of Cation Resins In Water Softener Systems. Suitable For Industrial And Domestic Equipment, Including Hidromatic Units. Key Features: Chemical Composition: Sodium Chloride (Nacl) ≥ 99.7% Shape: Cylindrical Compressed Tablets Tablet Size: 15–25 Mm (Depending On Manufacturer) Solubility: High, Without The Formation Of Insoluble Precipitate Insoluble Impurity Content: ≤ 0.01% Color: White Smell: None Content Of Anti-Caking Additives: None (Or A Minimum Amount Of E535 Is Allowed, Depending On The Brand) Purpose Of The Brine: Preparation Of A Concentrated Salt Solution For Resin Regeneration Compatibility: Suitable For All Softeners With A Salt Tank, Including Hidromatic Srl Units Packaging: 25 Kg Bags Storage Conditions: In A Dry Place, Without Contact With Moisture. Gost 13830-97, Gost 51574-2018, Gost 12.1.007-76, Gost 15150-69, Silicone Lubricant For Doors. Product Description: General Purpose Silicone Grease Designed To Lubricate And Protect Door Locks, Hinges, Rubber Seals, Battery Terminals And Other Elements That Require Reduced Friction And Protection From Moisture. Key Features: Product Type: Silicone Lubricant. Release Form: Liquid/Lubricant In A Bottle With A Dispenser. Volume - No Less Than 0.4 L. Purpose: For Locks, Hinges, Rubber Seals, Battery Terminals. The Unit Of Measurement Is Piece. Functional Requirements: The Product Must Provide Lubrication Of Rubbing Surfaces, Reduce Squeaking, Protect Against Moisture, And Prevent Rubber Seals From Drying Out And Freezing. The Lubricant Must Be Suitable For Use In Household, Economic And Technical Purposes. Quality Requirements: The Product Must Be New, Unused, In Original Packaging, Without Damage Or Signs Of Tampering. The Labeling Must Contain The Name Of The Product, Volume, Purpose, Method Of Use, Information About The Manufacturer And Expiration Date/Date Of Manufacture. Standard: The Product Must Comply With Gost 13032-77 And/Or The Manufacturer’S Specifications. Delivery Terms: The Goods Are Delivered In Packaging That Ensures Safety During Transportation And Storage., Ferric Chloride (Coagulant) Iron (Iii) Chloride, Fecl₃, Solution Purpose: Ferric Chloride Is Used As A Coagulant To Settle And Remove Suspended Solids, Organics, Phosphates And Other Contaminants In Wastewater. Effective In Voc Systems, At Water Treatment Plants, And In The Treatment Of Industrial And Medical Wastewater. Technical Parameters: Parameter Meaning Chemical Formula Fecl₃ Appearance Dark Brown Liquid Mass Fraction Of Iron (Fe³⁺) 12% Density 1.40–1.50 G/Cm³ At 20°C Solution Ph < 2 (Strongly Acidic Environment) Solubility In Water Complete Freezing Point ~ -6°C Shelf Life Up To 6 Months (In A Tightly Closed Container, Away From Moisture) Packaging Canisters 30 L, Benefits: • High Coagulation Efficiency • Removal Of Phosphates And Suspended Solids • Rapid Settling And Formation Of Dense Sediment • Works Over A Wide Ph Range (4–11) • Does Not Cause Secondary Water Pollution Compliance: • Tu 2122-017-00209023-2006 • Applied In Accordance With Sanitary Standards (Sanpin) • Approved For Use In Water And Wastewater Treatment, Product Description: Silicone Sanitary Sealant, Transparent, Designed For Sealing Seams, Joints And Connections When Performing Interior Work. Key Features: Product Type: Sealant. Type: Silicone Sanitary. Color: Transparent. Packaging Volume: At Least 280 Ml. Scope Of Application: For Interior Work. Processing Material - Ceramics, Tiles, Glass, Sanitary Surfaces And Other Smooth Surfaces. Release Form: Cartridge/Tube For Mounting Gun. The Unit Of Measurement Is Piece. Functional Requirements: The Sealant Must Provide Reliable Sealing Of Seams And Joints, Be Moisture-Resistant, Elastic After Drying, Resistant To The Formation Of Mold And Mildew, And Be Suitable For Use In Sanitary Premises. Quality Requirements: The Product Must Be New, Unused, In Original Packaging, Without Damage Or Signs Of Tampering. The Packaging Must Contain The Name Of The Product, Volume, Color, Purpose, Method Of Use, Date Of Manufacture, Expiration Date And Information About The Manufacturer. Standard: The Product Must Comply With Gost 25621-2023 - Construction Polymer Sealing And Sealing Materials And Products. Classification And General Technical Requirements. Delivery Terms: The Goods Are Delivered In Packaging That Ensures The Safety Of The Goods During Transportation And Storage., Watering Hose. Hose Type: Watering Length: 120 M Diameter: 25Mm Material: Rubber Features: Reinforced Additional Information: Tube Length: 40 M, Internal Diameter: 25 Mm, Pressure: 4 Bar, Operating Temperature: -35°C / +70°C. Rubber Hose For Watering, Garden, Designed For Watering Vegetable Plots, Lawns, Walking Areas. Gost 10362-2017