Request For Quotation Purchase Of Furniture And Components (Cabinet, Bracket) For The Regional Testing Center (Rtc)

Camera Bracket - Bracket For Attaching A Webcam / Cctv Camera To Furniture (Table-Cabin). Type: Rigid Fastening To Table Elements Made Of Chipboard (To The Back Panel Or Table Top) Using A Screw Connection That Eliminates Backlash. Camera Mounting Type: Universal Screw/Thread Standard 1/4 Inch Construction: Rigid Metal Or Reinforced Composite Structure, Providing Full Reach And Optimal Viewing Angle Working Area Of The Table.2. Height/Length Of Reach: Optimized For The Overall Height Of The Booth Table (120 Cm) To Ensure The Correct Angle Of Shooting The Face Of A Seated Person From Top To Bottom Or At Eye Level. Adjustment: The Presence Of A Rotating Joint (3D Head) With A Lock For Precise Adjustment Of The Angle Of Tilt And Rotation Of The Camera. Cable Management: The Presence Of Integrated Clamps, Clips Or An Internal Channel For Hidden And Neat Routing Of The Cable From The Camera To The Table.3. Material: Metal (Steel/Aluminum) With Anti-Corrosion Coating Or Impact-Resistant Industrial Plastic. Color: White (Matching The Color Of The Main Body Of The Table) Or Neutral Metallic/Chrome To Maintain A Uniform Aesthetics Of The Workplace.4. The Bracket Must Be Certified Or Tested As Part Of A Furniture Structure For Compliance With Strict Standards: En 12520 (Furniture) - Guarantees That The Bracket Body And Its Adjustment Units Are Resistant To Mechanical Shock, Do Not Have Sharp Cutting Edges, Chips And Dangerous Gaps That Can Injure The User When Manually Adjusting The Camera. En 1022 (Furniture. Determination Of Stability) - Guarantees High Rigidity Of Fixation. The Design Of The Bracket Should Completely Dampen Small Vibrations That Arise From Working At A Desk (Typing On A Keyboard, Moving A Mouse), Preventing “Shaking” And Blurring Of The Video Stream.5. Contents: Supplied Complete With A Special Installation Kit (Fasteners, Hardware, Gaskets) For Reliable Fixation On A Laminated Chipboard With A Thickness Of 16 To 25 Mm., Designed For The Safety Of Personal Belongings (Phones, Smartphones, Gadgets, Keys, Documents) Rct. A Single Body, Divided Into At Least 30 Independent Cells. The Cabinet Design Can Be Welded Or Collapsible With Increased Rigidity. There Is The Possibility Of Wall Mounted Mounting Or Installation On A Podium. The Presence On The Rear Wall Of Factory-Made Holes For Anchoring To The Wall. The Body And Doors Of The Cells Must Be Made Of Cold-Rolled Sheet Steel With A Thickness Of At Least 0.6 Mm (Up To 1.0 Mm Is Allowed). Cabinet Dimensions Height: From 650 To 1600 Mm. Width: From 600 To 900 Mm. Depth: No More Than 250 Mm. Dimensions Of One Cell The Internal Dimensions Of The Cell Should Allow Free Placement Of A Modern Smartphone (Up To 7 Inches Diagonal), A Wallet And A Bunch Of Keys. The Approximate Size Of The Light Opening Of The Cell Door: Width Not Less Than 140 Mm, Height Not Less Than 70 Mm. Locking Device (Locks) Each Of The 30 Cells Must Be Equipped With An Individual Flag (Postal) Type Mortise Key Lock.. Each Lock Must Be Supplied With At Least 2 Individual Keys. The Supplier Is Obliged To Complete The Product With 1 (One) Special A Universal Master Key Capable Of Opening Any Of The 30 Cabinet Cells In Emergency Mode By The Administrator On Duty. Protective And Decorative Coating Wear-Resistant Powder (Polymer) Coating That Provides Protection Against Corrosion And Mechanical Scratches. Color: Light Gray (Ral 7035 / Ral 7040) Or Equivalent. The Coating Must Be Resistant To Regular Wet Cleaning And Treatment With Disinfectants. Visual Indication And Numbering On The Door Of Each Cell There Must Be A Place For Installing Or Sticking A Serial Number From 1 To 30.