Request For Quotation Purchasing Construction Goods

Quartz Sand (Or River Sand). Characteristics. Fractional Composition: Not Less Than 0.06–1.2 Mm; Origin: Natural Quartz Or River Sand; Grain Shape: Acute, Crushed Or Partially Rounded; Color: Light Yellow, White Or Grey; The Content Of Clay And Dust Particles Is Not More Than 1.0%; Free Of Clay Impurities In Lumps And Organic Impurities; Humidity Upon Delivery: No More Than 5%; Bulk Density: Not Less Than 1300–1500 Kg/M³; True Grain Density: No Less Than 2600–2650 Kg/M³; Mohs Hardness 7 (High Abrasion Resistance); Filtration Coefficient: Not Less Than 5 M/Day., Two-Component Polyurethane Adhesive For Lawn And Artificial Grass. Characteristics. Composition: Component A: Polyurethane Resin; Component B: Isocyanate Hardener; Does Not Contain Water Or Organic Solvents. Blend Color: Beige/Light Brown; Component Ratio: Approximately 9:1 By Weight; Viability Of The Mixture At +20°C: No More Than 30–60 Minutes; Primary Setting: At Least 6–12 Hours; Complete Curing: At Least 24–48 Hours; Consumption For Artificial Grass: Approximately 0.8–1.2 Kg/M²; Working Temperature Of Application: From +10°C To +30°C; Operating Temperature From −40°C To +120°C; Density Of Component A: About 1.5–1.7 G/Cm³; Density Of Component B: About 1.1–1.2 G/Cm³. Properties: High Elasticity, No Shrinkage, Moisture Resistance, Resistance To Weathering And Temperature Changes. The Kit Contains Two Components: Component A: Basic Paste (Polyurethane Resin With Fillers); Part B: Liquid Hardener (Isocyanate) In A Separate Small Bottle., Laminated Chipboard. Characteristics. Color Range: Neutral Light Gray Shade That Easily Combines With Both Bright Colors And Wood Decors.; Surface Type, Texture: Shagreen / Pe (Fine Grain); Base: Chipboard, Emission Class E1-E0.5; Thickness: No Less Than 16 Mm / 18 Mm; Sheet Format, Length: No Less Than 2800; Width: Not Less Than 2070 Mm; Sheet Area: Not Less Than 5.03 M²; Density: Usually Varies From 650 To 750 Kg/M³; Lamination On Both Sides; Variety1., Non-Woven Needle-Punched Material. Characteristics. Material Type: Non-Woven Needle-Punched Geotextile; Surface Density: No Less Than 200 G/M² (Weight Tolerance ≤ 8-10%); Thickness Of The Canvas: At Least 1.4 – 2.5 Mm (Measured Under A Load Of 2 Kpa); Breaking Load (Strength): No Less Than 5.0 – 7.0 Kn/M; Elongation At Break: Within 50 – 140% (Provides High Elasticity And Resistance To Tearing); Punching Strength: Not Less Than 600 – 800 N; Filtration Coefficient: ~50 ± 15% M/Day (At A Pressure Of 2.0 Kpa); Pore ​​Size (Filtration Capacity): No More Than 130 Microns (Effectively Retains Soil Particles); Roll Size: No Less Than 2 × 50 M; Total Area Of ​​The Canvas Per Roll: Not Less Than 100 M²; Material (Composition): 100% Polyester Or Polypropylene; Color: Mix (A Mixture Of Polyester Fibers Of Various Shades), Birch, Coniferous Or Combined Plywood. Characteristics. Thickness: Not Less Than 6 Mm (Technological Tolerance ± 0.2 – 0.5 Mm Is Allowed, For Example, Not Less Than 6.5 Mm); Sheet Size: No Less Than 1220 × 2440 Mm; Sheet Area: Not Less Than 2.98 M²; Number Of Layers (Veneer): At Least 5 Layers; Density: At Least 550–700 Kg/M³ (Depending On The Type Of Wood); Humidity: At Least 5–12%; Thickness Deviation: ±0.4–0.6 Mm (Standard); Formaldehyde Emission Class: E1 (For Interior Use); Sanding: Nsh (Unpolished), Sh1 (One-Sided), Sh2 (Double-Sided); Glue Brand: Fk (Moisture Resistant For Interior Use) Or Fsf (Increased Moisture Resistance For Exterior Use); Bending Strength: No Less Than 30–60 Mpa.