Tenders Are Invited For B44 Rekawinkel Od Bds

First, The Milling Work Must Be Carried Out By The Contractor. The Existing Covering Must Be Milled Off Over The Entire Surface To A Thickness Of 5Cm. In Addition, Existing Damaged Areas (Around 600M²) Will Be Milled Off By A Further 7Cm. After The Milling Work Has Been Carried Out, The Milling Surface Is Jointly Accepted Between The Client And The Contractor. The Contractor Then Installs A New 7Cm Stake Bit In The Areas Of The Damaged Areas (Around 600M²). Install Binder Course Ac22bin, Pmb 45/80-65, H1, G4, Ka20. The Individual Damaged Areas Must Be Installed At A Width Of Approx. 1.50M. All Additional Costs Resulting From Installation With A Width Of 1.50 M Must Be Included In Item 260401J “Difficulty In Asphalt Installation For Widths >1.20-2.60 M, 7.0 Cm”. Afterwards There Is A New 5Cm Thick Bit. Install Top Layer Ac16deck, Pmb 45/80-65, A2, G1, Ka20.