Bids Are Invited For Price Registration For Future And Eventual Hiring Of A Specialized Company For The Supply, Manufacture And Assembly Services Of Custom-Made Mdf Furniture For The Entire Structuring Of The Administration Of The Municipality Of Conceição De Ipanema/Mg, According To Specifications, Quantities And Requirements Established In The Preliminary Technical Study (Annex I) And In The Term Of Reference (Annex Ii).

Cabinet Made Of High-Resistance Mdf, Minimum Thickness Of 18 Mm, In Standard White Tx (Textured), With Moisture Treatment On All Visible Sides. Structure Composed Of Sides, Base, Top And Internal Dividers In 18 Mm Mdf, Bottom In Minimum 6 Mm Mdf, Duly Fitted And Fixed. Doors In 18 Mm Mdf, With Metal Mug-Type Hinges, Minimum Opening Of 110°, With Metal Handles And Suitable Closing System. Drawers In 15 Or 18 Mm Mdf With A Minimum Depth Of 6 Mm, Telescopic Metal Slides Or Similar Of Good Quality, Allowing Total Opening. All Edges Must Receive Pvc Or Abs Edge Tape Of At Least 0.45 Mm, Hot Glued, Guaranteeing Finishing And Protection. Finished In Paint Or Melamine Coating In White Tx, Easy To Clean And Maintain. Hardware (Screws, Bolts, Minifix, Hinges, Slides And Handles) Must Be Of Top Quality, Guaranteeing Stability And Durability Of The Set. The Drawers Must Be Made Of High-Resistance Mdf, With Sides, Front And Back Made Of Mdf With A Minimum Thickness Of 15 Mm (Preferably 18 Mm), And A Bottom Made Of Mdf Of At Least 6 Mm, Properly Fitted And Fixed To The Drawer Structure. The Mdf Must Be Of The Highest Quality, Suitable For Institutional Use, With A Melamine Coating Or Similar Compatible With The Standard Of The Cabinet (Light Woody Or White Tx), Resistant To Scratches And Easy To Clean. The Drawers Must Have Metal Slides (Preferably Telescopic) Of Good Quality, Allowing Smooth Sliding And Total Opening, With A Minimum Load Capacity Compatible With Use (At Least 25 Kg Per Drawer Is Recommended). The Exposed Edges Must Receive Pvc Or Abs Edge Tape Of At Least 0, Applied Hot. Metallic Handles Or Handles Made Of Good Resistance Material Must Be Installed Firmly And Safely, Guaranteeing Ergonomic Handling. Structure Composed Of Sides, Top And Internal Shelves In 18 Mm Mdf, With Open Niches Sized According To The Project, Ensuring Good Load Capacity And Stability. Bottom In Minimum 6 Mm Mdf, Fitted And Fixed To The Structure. All Visible Edges Must Receive Pvc Or Abs Edge Tape Of At Least 0, Applied Hot, Ensuring Adequate Finishing And Protection Against Moisture. The Mdf Must Be Of The Highest Quality, Suitable For Furniture For Institutional Use, With Good Mechanical And Moisture Resistance, And All Assembly Hardware (Dowels, Screws, Minifix) Must Be Of High Quality, Guaranteeing The Durability And Safety Of The Cabinet. The Drawers Must Be Made Of High-Resistance Mdf, A Decorative Element In The Shape Of A Tree, Made Of High-Resistance Mdf, A Minimum Thickness Of 15 Mm (Or Greater), With General Dimensions As Per The Executive Project. Structure Composed Of Trunk And Tree Top In Cnc Or Similar Cut-Out Pieces, Ensuring Precision Of Shapes And Stability Of The Set. Trunk In Mdf In Woody Color “Peroba” Pattern (Melamine Coating, Bp Or Similar), With Finish On Both Sides, Resistant To Scratches, Abrasion And Easy To Clean. Tree Top Made Of Mdf In Light Green Color (Melamine Coating, Bp Or Painting In A Uniform Pattern),