Bids Are Invited For Contracting A Company For The Supply Of Hospital Equipment, Chairs, And Electronics For Municipal Health Care (State Resource)

Lung Ventilator (Adult, Pediatric And Neonatal)1. Purpose Of The Equipment: The Lung Ventilator Is Intended For Ventilatory Support For Adult, Pediatric And Neonatal Patients (Including Premature Newborns), In Intensive Care Environments, And Must Operate In Invasive, Non-Invasive And High-Flow Ventilation Modes, As Per Clinical Need.2. General Technical Requirements: The Equipment Must Meet The Following Minimum Requirements: Suitable For Use In Neonatal, Pediatric And Adult Patients (Including Those With Morbid Obesity), With Adjustable Parameters According To Age Group; It Must Operate With Pneumatic Supply Via O₂ And Medical Compressed Air, With An Input Pressure Of 280 To 600 Kpa; It Must Be Microprocessed, With Pressure, Volume, Flow And Time Control; It Must Contain A Touch Screen With An Intuitive And Easy-To-View Graphical Interface (At Least 12 Inches); It Must Have Invasive And Non-Invasive Ventilation Modes, Allowing Controlled, Assisted And Spontaneous Ventilation; Must Have High Nasal Flow Modality (Hfnc) For Non-Invasive Support, Including Neonatal Patients; 3. Ventilation Modes (Minimum Required): Invasive Modes (Minimum): Controlled Volume; Controlled Pressure; Assisted/Controlled Volume; Assisted/Controlled Pressure;Pressure Support; Simv With Controlled Volume; Simv With Controlled Pressure; Invasive Cpap; Dual Control Mode (Ex: Pressure With Guaranteed Volume). Non-Invasive Modes (Minimal): Non-Invasive Cpap; Non-Invasive Pressure Support; High Flow Mode (Hfnc) With Gas Mixture; Simv Non-Invasive. All Modes Must Feature Automatic Backup Ventilation In Case Of Apnea.4. Minimum Resources And Functionalities: Graphical Interface With Simultaneous Visualization Of Me, Climatic Chamber, With The Following Minimum Specifications: Internal Construction In Stainless Steel Aisi 304 Or Equivalent, And External In Steel Sheet Sae 1010/1020, Aluminum Or Material With Equivalent Resistance Proven Nominal Capacity Between 120 And 150 Liters Drains Distributed To Ensure Effective Removal Of Excess Moisture Thermal Insulation Made Of High-Efficiency Material (Polyurethane Or Equivalent) Forced Air Circulation System With Uniform Ventilation Door With Automatic Temperature Compensation And Moisture Removal System From The Internal Glass To Prevent Fogging Microprocessed And Programmable Temperature And Humidity Control Relativeprogrammable Audible And Visual Alarms For Conditions Outside The Defined Parameterheating By Shielded Resistance In Stainless Steelcfc-Free Refrigeration Systemwater Consumption Of Less Than Relative From 30% To 90% ± 5% New Product, With A Minimum Warranty Of 12 Months, Authorized Technical Assistance In The National Territory, Compliance With Applicable Brazilian And International Technical Standards (Ex: Abnt Nbr Iso 9001, Iec 60068), Frost Free Duplex Refrigerator, With The Following Minimum Specifications: Internal Useful Capacity Between 490 Liters And 520 Liters New Product, With A Minimum Guarantee Of 12 Months In Compliance With Brazilian Technical Standards