Tenders Are Invited For Modernization Of The Municipal Market In Koźminek

1. The Investment In Question Is Located In The Town Of Koźminek, Plot No. 33, City Of Koźminek District, In The Koźminek Commune. 1.2 Existing Condition. The Area Within Which The Surface Replacement Is Planned Is Covered With Building Material, I.E. Crushed Aggregate Fraction 0/31.5 Mm With A Total Thickness Of Approximately 30 Cm. The Designed Works Will Consist In Replacing The Surface From Aggregate To Concrete Cubes. After The Modernization, Both The Function And Parameters Of The Marketplace Will Remain Unchanged. The Water Will Be Drained According To The Existing Conditions, I.E. Partly To The Existing Rainwater Drainage Inlets And To The Remaining Surface Of The Market Square With An Aggregate Surface. The Above Elements Were Constructed As Part Of The Building Permit Issued No. Ab.6740.178.2012 Of April 10, 2012, Covering The Construction Of A Municipal Market. The Actions Taken Are Aimed At Improving The Safety And Comfort Conditions For The Market Users. 1.3 Description Of Design Solutions. The Area Was Designed To Be Hardened With Concrete Paving Stones On An Area Of ​​18.10 X 88.10 M. Concrete Edges 8X30x100 Were Designed To Frame The Surface. The Transverse Inclination Is Designed As One-Sided With A Value Of 1-3%. The Longitudinal Inclination Cannot Exceed 6%. The Grade Line Should Be Placed At A Level Of +1 Cm In Relation To The Edge Being Laid. Before Laying The Surface, The Existing Area Should Be Profiled And Then A Layer Of Cement-Sand Ballast 3-5 Cm Thick Should Be Placed. Note: During Road Works, The Contractor Is Responsible For Securing The Geodetic Signs. A Detailed Description Of The Subject Of The Order Is Included In The Design Documentation, Construction Design, Technical Design, Bill Of Quantities. Note: The Bill Of Quantities Attached To The Swz Should Be Treated As An Additional (Auxiliary) Element And Not Used To Describe The Subject Of The Order. And Calculation Of The Offer Price. All Proper Names Of Materials And Devices Used In The Swz And The Attached Documentation Are Provided As Examples And Specify Only The Minimum Expected Quality Parameters And The Required Standard. If Trademarks, Patents And The Origin Of Devices And Materials Are Indicated In The Description Of The Subject Of The Order Or Design Documentation, They Should Be Treated As The Designers Proposals. The Ordering Party Allows The Use Of Equivalent Materials And Devices To Those Designed In Accordance With The Same Or Better Technical, Technological And Quality Standards. In Addition, Replacement Materials Or Devices Accepted For Valuation Should Fulfill The Function They Are Intended To Serve, Should Be Compatible With Other Devices So That The Set Of Devices Gives The Intended (Designed) Effect, And Cannot Influence The Change In The Type And Scope Of Construction Works. A Contractor Who Refers To Equivalent Solutions Described By The Ordering Party Is Obliged To Demonstrate That The Construction Works Offered By Him Meet The Requirements