Request For Quotation 03. Metal Gates. Horizontal, Metal Blinds. (Z.524)

03. Metal Swing Gates (Double-Leaf). Overall Dimensions Of The Opening (W×H): 2500 × 2500 Mm. Frame Of The Doors: Made Of Rectangular Steel Profile With A Cross-Section Of At Least 60×40×2 Mm (According To Gost 32931). The Design Must Ensure Rigidity And Absence Of Deformation Under Its Own Weight. Filling Material: Sandwich Panels Filled With Polyisocyanurate Foam (Pir) Or Equivalent With Similar Thermal Insulation Properties. Complete Set And Fittings: Support Posts (Pillars): Steel Profile With A Cross-Section Of At Least 100×100×4 Mm (To Ensure Resistance To Wind Loads According To Class 1 According To Gost). Hinges: On Support Bearings, With A Diameter Of At Least 30 Mm - 3 Pcs. For Each Sash. Locking Devices: Lower Vertical Valves (Stoppers) - 2 Pcs. Central Locking Device For A Padlock With Metal Eyes No Less Than 4 Mm Thick. Handles: Metal Brackets On Both Sides. Anti-Corrosion Protection: Metal Surfaces Must Be Cleaned, Degreased And Primed. The Final Coating Is Polymer Powder Or Enamel Type Pf-115 In Two Layers, Color Ral7004. Gost 31174-2017. Certificate, 03. Metal Swing Gates (Double-Leaf). Overall Dimensions (W×H): 2000 × 2200 Mm. Frame Of The Doors: Made Of Rectangular Steel Profile With A Cross-Section Of At Least 60×40×2 Mm (According To Gost 32931). The Design Must Ensure Rigidity And Absence Of Deformation Under Its Own Weight. Filling Material: Sandwich Panels Filled With Polyisocyanurate Foam (Pir) Or Equivalent With Similar Thermal Insulation Properties. Complete Set And Fittings: Support Posts (Pillars): Steel Profile With A Cross-Section Of At Least 100×100×4 Mm (To Ensure Resistance To Wind Loads According To Class 1 According To Gost). Hinges: On Support Bearings, With A Diameter Of At Least 30 Mm - 3 Pcs. For Each Sash. Locking Devices: Lower Vertical Valves (Stoppers) - 2 Pcs. Central Locking Device For A Padlock With Metal Eyes No Less Than 4 Mm Thick. Handles: Metal Brackets On Both Sides. Anti-Corrosion Protection: All Metal Surfaces Must Be Cleaned, Degreased And Primed. The Final Coating Is Polymer Powder Or Enamel Type Pf-115 In Two Layers, Color Ral7004. Gost 31174-2017. Certificate