Tenders Are Invited For Construction Of A Warehouse In Płoskinia

The Subject Of The Order Is: Construction Of A Warehouse In Płoskinia With A Minimum Area Of ​​120 M2 In The Design And Build Formula. The Subject Of The Order Includes The Design, Obtaining The Necessary Permits And Construction Of A Warehouse Building Intended For The Needs Of Civil Protection And Civil Defense With The Following Parameters: 1) Light Galvanized Steel Frame Structure, Resistant To Wind And Other Atmospheric Factors, Ensuring The Stability Of The Facility And Enabling Quick Assembly, Protected Against Corrosion Of Steel Elements, Structure And Covering Enabling Quick And Easy Repair In The Event Of Any Damage, With The Possibility Of Carrying It Out By The Ordering Party; 2) Covering Roof: The Facility Must Meet The Requirements Of Polish Standards Regarding Snow Loads And Wind Resistance, Roof Sheet Thickness: Galvanized And Coated Trapezoidal Sheet (Top Min. 0.7 Mm, Bottom Min. 0.5 Mm), Pir Roof Panel Thickness: Min. 12 Cm;3) Retaining Walls: Made Of Prefabricated Structural Elements So As To Minimize Their Implementation Time At The Assembly Site, Wall Thickness: Pir Board Min. 10 Cm - Thickness Of Galvanized And Coated Sheet - 0.5 Mm, Made Of Corrosion-Resistant Materials, Protected From The Inside And Outside With Anti-Corrosion Agents (E.G. Paint, Etc.), Height Of Pir Walls: Min. 3.5 M, Fasteners: Sheet Metal Screws, Set Of Seals And Connectors; 4) Usable Warehouse Area: Min. 120 M;5) Gates: 2 X Industrial Entrance Gate (At The Top), Width: 300 Cm, Height: 350 Cm. With A Light Structure, Made Of Materials Protected Against Corrosion, Location Of Entrance Gates And Passenger Doors According To The Requirements Of The Ordering Party, Gate Armor Made Of Steel Sections, Gates Opened Manually, Guidance System - Steel Structure, Hot-Dip Galvanized, Shaft With Torsion Springs - Spring Strength Min. 25,000 Cycles, Protection In The Event Of Cable Breakage, Protection In The Event Of Spring Breakage, 6) Floor: Thickness. 2 X 12 Cm, Industrial Floor - Smooth Troweled Concrete, With Appropriate Strength Adapted To The Type Of Building And Its Purpose;7) Technical Doors, Dimensions 90X200, Double-Leaf, Thickness. 53 Mm Door Leaves, Solid, Division, Lock, Door Handle Fitting, 3 Hinges, Door Closer;8) Electrical And Lighting Installation;9) Lightning Protection Installation: Ring Or Pin In Accordance With Applicable Regulations And Standards;10) 1 Piece Of Showcase With Dimensions: Width: 200 Cm, Height: 150 Cm, White, Three-Glazed, Profile Width 70 Mm;11) Sheet Metal Flashings: Roof Flashings Made In A Way That Prevents Rainwater From Getting Wet On The Walls, Galvanized Steel Flashings - Sheet Thickness 0.5 Mm, Gutter 125 Mm, Downpipe 100 Mm, Terminated At Level 0 With A Discharge Elbow, Terminated At Level 0 With A Discharge Elbow; 12) Installation Of External Rainwater Drainage; 13) Monitoring: Recorder And At Least 2 Cameras (1 Inside, 1 Outside);14) Protection: Hot-Dip Galvanizing In Accordance With The Standard.3. The Scope Of Wor