Tenders Are Invited For Modernization Of The Access Road To Agricultural Land On The Karsin - Miedzno Route, Stage Ii, Karsin Commune

1) The Subject Of The Order Is The Reconstruction Of The Municipal Road On The Karsin - Miedzno Route. Stage Ii, Plot No. 61/2, Bak District, Plot No. 1049, Karsin District, Karsin Commune. 2) The Scope Of Works Includes The Construction Of A Surface Made Of Mineral-Bituminous Mixtures In Two Layers With A Base: A) Mechanical Leveling Of The Ground (Leveling), Troughing, Slopes, Removal Of Excess From The Roadbed, Grubbing/Uprooting Of Tree Trunks; B) Laying A Base Made Of Crushed Aggregate With A Thickness Of 15 Cm After Compaction;C) Mechanical Profiling And Compaction Of The Construction Layer;D) Sprinkling Asphalt Emulsion On The Bituminous Surface (Between The Layers Of Bituminous Mass);E) Laying 2 Layers Of Bituminous Mass (Binding Layer 4 Cm Thick And Wearing Course 4 Cm Thick) With A Variable Width Of 4.0 (720 M Long) And 4.5 M (80 M Long) M;F) Profiling, Hardening And Compacting The Roadsides, 0.50 M Wide On Each Side. Modernized Road On A Section Of 800 M And 4.0 - 4.5 M Wide + Shoulders (I.E. Width 4.0 M Along The Length - 720 M; Width 4.5 M Along The Length - 80 M). Notes! The Road Should Be Constructed Centrally In Its Axis. Use A Roof And One-Sided Inclination.3) According To The Common Procurement Vocabulary (Cpv), The Subject Of The Order Covers The Scope Defined By The Codes: 45233120-6 Road Construction Works.4) The Contractor Is Obliged To Compare The Compliance Of The Submitted Studies And In The Event Of Any Discrepancies, He Is Obliged To Ask The Ordering Party In Writing For An Explanation As Soon As Possible. In The Event Of Differences In Technological Solutions (Including The Materials And Devices Used), The Solutions Presented In The Construction Design, Bills Of Quantities And Additional Descriptions Shall Apply First.5) To Perform The Order, The Contractors Are Obliged To Use New Materials And Devices, Grade I, Purchased From Reputable Manufacturers, Guaranteeing The Highest Quality, With Technical And Quality Parameters Not Worse Than Those Specified In The Bills Of Quantities. The Names, Types And Origins Of Products Appearing In The Studies Are Not Binding On The Contractors.6) To Complete The Order, The Contractors Are Obliged To Use Equipment And Materials That Meet The Requirements Of The Polish Standard Transposing The European Standard Pn-En (Harmonized Standards) And Others Specified In The Technical Specification For The Execution And Acceptance Of Construction Works And Design Documentation. The Contractor Is Obliged To Have Documents For The Materials And Devices Used That Allow Their Use In Construction (Attestations, Certificates, Declarations Of Conformity, Quality Certificates). 7) Where The Origin (Brand, Trademark, Manufacturer, Supplier) Of Materials Or Standards Referred To In Art. Is Indicated In The Drawings, Documentation Or Description Of The Subject Of The Order. 101 Section 1-3 Of The Public Procurement Law, The Ordering Party Allows The Offer Of Materials Or Equivalent Solutions. The Concept