Automatic Transmission Oil Dexron Iii Automatic Plus Is A Universal All-Season Oil Designed For Use In Automatic Transmissions, Hydraulic Steering Systems And Hydraulic Clutches Of Vehicles. Has High Performance Characteristics. Ensures Durability Of Transmission Parts. The Product Has Approvals / Meets The Specifications: Gm Dexron Iii G; Ford Mercon; Mb 236.9; Allison C4; Volvo S6-66; Pdf Applications (In Cans), Ball Bearing No. 6310 (With Manufacturers Passport No Earlier Than 2024), Ball Bearing No. 6313 / C3 (With Manufacturer’S Passport No Earlier Than 2024), Steel Gate Valves 30S41nzh (Ru-16), Dn 250 Mm. Complete With Flanges And Fasteners, Application - Flanged Steel Cast Valve 30S41nzh Is Used To Shut Off The Flow Of The Working Medium In The Pipeline. Brand - 30S41nzh (Zkl2-16). Control - Manual Flywheel). Nominal Pressure, Pn = 1.6 (16) Mpa (Kgf/Cm2). Working Medium - Water, Steam, Oil, Petroleum, Natural Gas, Liquid Non-Aggressive Petroleum Products, Non-Aggressive Liquid And Gaseous Media, In Relation To Which The Materials Used In The Valve Are Corrosion-Resistant. Working Environment Temperature = - 40°C. + 450°C. Minimum Ambient Temperature = - 40°C. Case Material - Steel. The Valve Seal Material Is Stainless Steel. Tightness Class - A According To Gost 9544-200.5 Design Features - Cast. Connection - Flange. The Spindle Design Is Retractable. Operating Conditions - U1. Service Life = At Least 10 Years. Material Design Of The Valve 30S41nzh: Body, Cover And Wedge (Discs) - Steel 25L; Spindle - 20Х13; Spindle Nut - Steel 45; Nut - Carbon Steel Gost 1050-88 Strength Class Not Lower Than 5 According To Gost 1759.5-87; Stud And Bolt - Carbon Steel Gost 1050-88 Strength Class Not Lower Than 5.6 According To Gost 1759.5-87; Hinged Bolt - Steel 35; Seal Between The Body And The Cover (Gasket And Ring) - Paronite, Trg; Oil Seal Packing - Agi, Trg; Flywheel - Steel 25L; Surfacing On The Ring In The Body - 07Х25н13, 08Х21н10г6; Surfacing On The Wedge - 13Х25т, 10Х17т., Hammer Enamel Paint. For Simultaneous Rust Conversion, Anti-Corrosion Priming And Finishing Painting Of Clean And Corroded Metal Surfaces With A Thickness Of Rust Firmly Bound To The Metal Up To 80 Microns, Requiring Good Decorative Properties And Long Service Life In Atmospheric Conditions And Indoors. It Is Used In Industrial Equipment, Doors, Gates, Fences, Housings For Video And Audio Equipment (Film Projectors, Telescopes), Banking Equipment, Artistic Forging Products, Metal Furniture (Racks, Cabinets, Safes, Etc.). Properties - Dries Quickly. Forms A Patterned (Hammer) Coating That Masks Minor Surface Defects. A Unique Textured Pattern Emphasizes The Beauty Of Handmade Products. The Coating Has High Weather Resistance, Increased Moisture And Anti-Corrosion Resistance. The Use Of Enamel Significantly Simplifies The Preparation Of The Surface Before Painting And Reduces The Cost Of The Technology For Creating An Anti-Corrosion Coating, Because Does Not Require Preliminary Removal Of Tightly Bound Rust And Priming, But Preliminary Priming Is Allowed. Colors Will Be Consistent. (In Cans Of 2.5-3.0 Kg.)
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
