Request For Quotation Purchase Of Materials For The Maintenance And Servicing Of Ventilation Facilities

Copper Pipe Ø9 Mm. Copper Tube Is Used For Installation Of Air Conditioning Systems. Outer Diameter: 9.52 Mm. Wall Thickness: 0.6–1.0 Mm (Depending On Type). Material: Copper Grade M1. Condition: Annealed (Soft) Or Hard. Length: Coils (15–50 M), The Flat Air Duct Connector 620 Skp Is Used For Transporting Air In Ventilation Systems. Plastic Ventilation Is Made Of Pvc Plastic., Freon 22 (Chemical Name - Difluorochloromethane, Symbolic Designation - R22) Is A Colorless Gas With A Faint Odor Of Chloroform, Liquefied Under Pressure. The Density Of Liquid Freon 22 At A Temperature Of 0°C Is 1285 Kg/M³, At A Temperature Of 25°C – 1192 Kg/M³. Freon Type. Freon Group. Hydrochlorofluorocarbons. Freon Type R-22. Weight 13.6 Kg., Type Freon. Freon Group Hydrochlorofluorocarbons. Freon Type R-134A. Weight 13.6 Kg 13.6, Copper Pipe Diameter 15 Mm. Designed For Installation Of Air Conditioning Systems. Outer Diameter: 15 Mm. Wall Thickness: 0.7–1.2 Mm. Material: Copper. Condition: Soft (Annealed) Or Hard, Holder 620 Dcp Rectangular Channel 60X204 Mm. Plastic Ventilation Is Made Of Pvc Plastic., Linear Ventilation Grille. Designed For Air Distribution And Removal In Ventilation And Air Conditioning Systems. Dimensions 250X250 Mm., Adjustable Supply And Exhaust Anemostat With Flange D-125. Equipped With A Mounting Flange For Connection To Round Air Ducts., Freon Icool R407c. Refrigeration Oil. Weight 11.3Kg., Plastic Rectangular Air Ducts 620 Vp 1.5 Meters Are Used For Transporting Air In Ventilation Systems. Plastic Ventilation Is Made Of Pvc Plastic., Freon R410a Is Designed For Refilling New High-Pressure Air Conditioning Systems. Also Used To Obtain Low Temperatures. It Can Serve As A Replacement For R22 Refrigerant, While R410a Has The Advantage Of Maintaining Its Performance Properties For A Long Time. When Leaked, It Practically Does Not Change Its Composition, I.E. The Equipment Can Simply Be Refilled With It. Freon 410 A. Weight 11.3 Kg., Connector 620 Sp12.5Kp Channels 125 Mm And 60X204 Mm Is Used For Transporting Air In Ventilation Systems. Plastic Ventilation Is Made Of Pvc Plastic., Copper Tube For Air Conditioning Systems. Designed For Installation Of Freon Lines In Air Conditioning Systems. Material: Copper Not Lower Than Grade M1. Outer Diameter: 6 Mm. Wall Thickness: Not Less Than 0.6 Mm. Condition: Annealed (Soft). Type Of Delivery: In Coils. Coil Length: At Least 15 M. Internal Surface: Clean, Free Of Dirt And Oxides. Pipe Ends: Sealed From The Factory. Compliance With Standards: Gost 617-2006., Flexible Non-Insulated Air Duct D-125 Mm, Foil-Coated With Metal Fins. The Maximum Temperature Of Transported Air Is 100 Degrees, The Minimum Temperature Of Transported Air Is -30 Degrees.