Request For Quotation Acquisition Of Materials For Repair Of Overhead Lines (National)

Earring Sr-12-16 Is A Coupling Linear Fitting Designed For Connecting Insulators Or Lugs With Suspension Elements On Overhead Power Lines. It Has A Breaking Load Of 120 Kn (12 Tons), Is Suitable For Pestles With A Diameter Of 16 Mm, Is Made Of Galvanized Steel, Ensuring Durability. Main Characteristics Of Sr-12-16: Breaking Load: Not Less Than 120 Kn. Pestle Diameter (Nominal): 16 Mm. Weight: ~0.41 Kg. Material: High-Quality Steel With A Protective Anti-Corrosion Coating (Hot-Dip Galvanized). Dimensions (Approximate): 22 Mm, 45 Mm, 23 Mm, 17 Mm. It Is Used To Complete Insulating Suspensions Of Wires And Lightning Protection Cables, Withstanding High Dynamic Loads, Including Vibrations Due To Wind., The Tension Bolt Clamp Nb-2-6 Is Designed For Anchoring Aluminum, Steel-Aluminum (As 120/19–150/24) And Copper Wires On 6–110 Kv Power Lines. Main Characteristics: Breaking Load - No Less Than 57–60 Kn, Weight - Approx. 1.64–1.85 Kg. The Body Is Often Made Of Cast Iron Or Steel, Modification Nb-2-6A Is Made Of Aluminum Alloy. Main Technical Characteristics Of Nb-2-6: Purpose: Fastening Wires To Tension Suspensions Of Anchor And Corner Supports. Type Of Wire: Aluminum (A), Steel-Aluminum (As), Copper (M), Sip-3. Wire Cross-Section: Mostly (Depending On Modification). Breaking Load: 57–60 Kn. Weight: 1.64–1.98 Kg (Depending On Manufacturer And Material). Housing Material: Cast Iron, Steel Or Aluminum Alloy (Modification “A”). Number Of Bolts: Typically 3 Bolts (For Standard Nb-2-6). Features Of The Modifications: Nb-2-6A (Aluminium): Dies And Housing Are Made Of Aluminum, Which Reduces Losses From Magnetization Reversal And Eliminates The Use Of Gaskets.