Quotation are invited for Damaged Fire Bricks Removal & Re-Fixing including Surface Cleaning Mechanically on Aux. Boilers B-2B Inside Furnace and Side Walls. DAMAGED FIRE BRICKS REMOVAL & RE-FIXING INCLUDING SURFACE CLEANINGMECHANICALLY ON AUX. BOILERS B-2B INSIDE FURNACE AND SIDE WALLSTOT AL AREA 65M2 OF FIRE BRICKS.REFRACTORY REMOVAL AND NEW REFRACTORY INSTALLATION WILL BE INDAMAGED/REQUIRED AREAS ONLY:·#ROOF SIDE BOT TOM, STEAM DRUM DOWNSIDE AND MUD DRUM TOPSIDE(14MX0.7MX0.075M)·#SIDE WALL FROM STEAM DRUM TO MUD DRUM AREA ON BOTH SIDES·#CASTABLE B AFFLE AREA (14M X 1.6M X 0.1M)·#FIRE BRICKS SIZES- 230 X 305 X 25MM, 310 X 305 X 25MM, 305 X 305 X50MM·#ENCLOSURE SIDE FRONT AND REA R BRICKS SIZES (310 X 305 X25MM)·#AFTER REMOVAL OF OLD DAMAGED REFRACTORY.·#THOROUGH CLEANING TO BE PERFORMED AFTER REFRACTORY REMOV AL.SCOPE OF WORK: -1. SURFACE CLEANING FOR INSPECTION AND DAMAGED REFRACTORY MENTIONEDLOCATION INSIDE BOILER SHOULD BE REMOVED AND REFIXING WITH NEWREFRACTORY MATERIAL.2. CLEAN THE CASING WITH PROPER TOOLS AS PER THE REQUIREMENT.3. FIRE BRICKS AFTER THE INSPECTION BY DEWA ENGINEER, THE DAMAGEDFIREBRICKS WILL BE REMOVED AND REPLACED WITH NEW ONES.NOTE: REFRACTORY IS CONSIDERED AS A HAZARDOUS MA TERIAL THUS, THECONTACTOR SHOULD COLLECT THE REMOVED (DAMAGED) REFRACTORY IN RED BAGS(PROVIDED BY DEWA) AND SHIFT IT TO AN ALLOCATED ZONE AND BARRICADE THEAREA WITH A WARNING SIGN FOR DISPOSAL.4. FIX THE FIRE BRICKS WITH CORRECT ALIGNMENT AFTER INSTALLATION5. WELD ING SHALL NOT BE CARRIED OUT WITHOUT THE APPROVAL OF DEWAENGINEERS AND APPROPRIATE PERMITS.NOTE: THE CONTRACTOR SHOULD ASK THE ALLOC ATED ENGINEER TO PROVIDE THEHOT WORK PERMIT ON DAILY BASIS BEFORE COMMENCING ANY HOT WORK ACTIVITY.6. THE WORK CARRIED OUT UNDER THI S CONTRACT SHALL BE INSPECTED BY DEWAENGINEERS/FOREMAN AT ALL STAGES OF WORK AND THERE SHALL ALWAYS HAVE FREEACCESS TO THE CONTRACTO R#S SITE.7. RE-FIX THE OLD OR NEW CLADDING SHEETS (PROVIDED BY DEWA) AS EXISTS INITS PREVIOUS CONDITION (IF REQUIRED)..8.DISPOSE OF OLD REFRACTORY, FIREBRICKS & INSULATION IN RED BAGS AS PERDEWA RULES AND REGULATIONS (NOTE IN POINT NO.3).9. IF THE TOTAL SURFACE AR EA SPECIFIED (65M2 OF FIRE BRICKS) IS NOTFULLY COMPLETED, PAYMENT WILL BE AS PER THE ACTUAL WORK CARRIED OUT.DEWA SCOPE:-1. SUPPLY O F FIRE BRICKS MATERIALS.2. DISPOSAL OF SCRAP, REFRACTORY & INSULATION FROM THE DESIGNATED AREA(RED BAGS).3. FORKLIFT WITH OPERATOR. / TO BE REQUESTED 02 DAYS AHEAD OF THEREQUIREMENT.4. LINE CLEARANCES.5. NDT SERVICES.6. SCAFFOLDING. BE REQUESTED 02 DAYS AHEAD OF T HE REQUIREMENT.7. PAYMENT WILL BE ON ACTUAL WORK BASIS.FOR TECHNICAL QUERY CONTACT: -# RASHED - 0568110028 -
[email protected]. AE.CONTRACTOR SHOULD PROVIDE:-1. MOBILIZATION OF MANPOWER WITH THE FOLLOWING--2. THE CONTRACTOR SHOULD HAVE CAPACITY AND RESOURCES F OR INSULATIONWORK.3. ALL KINDS OF TOOLS AND EQUIPMENT SUITABLE FOR JOB.4. RIVETS, SCREWS AND STEEL BANDS REQUIRED FOR THE WORK (MATE RIAL:SS16).( IF ANY INSULATION WILL BE REMOVE) & GA WIRE (SUPPLIED BYCONTRACTOR), AISI 304 RODS, AND NUTS FOR REFRACTORY FIXING IN C ASTABLEBAFFLE AREA5. TOOLS & TACKLES, ETC REQUIRED FOR THE WORK.6. HAND AND POWERED TOOLS, RIGGING TOOLS (ROPE, LIFTING BELTS, PULLY ),MATERIAL HANDLING FACILITIES, INSPECTION TOOLS AND ACCESSORIES. Qty: 1 Damaged Fire Bricks Removal & Re-Fixing including Surface Cleaning Mechanically on Aux. Boilers B-2B Inside Furnace and Side Walls. STANDARD TERMS & CONDITIONS 1) Prices should be DDP delivery duty paid at DEWA stores. 2) Quotation to be submitted only in local currency U.A.E Dirhams 3) DEWA Standard payment terms is 30 days credit from the date of acceptance of material 4) No DEWA staff or his or her relatives up to third degree should have ownership or partnership in your company, and your participation in DEWA tenders / RFQs should not constitute a Conflict or perceived Conflict of Interest. Supplier Registration: https://srm.dewa.gov.ae/irj/portal/anonymous/regis Tender Link : https://srm.dewa.gov.ae/sap/opu/odata/sap/ZSRM_RFX_REG_BID_SRV/AttachmentSet(2332601396)/$value
