Bids Are Invited For Acquisition Of Tools And Equipment To Carry Out Small Mechanical And Electrical Repairs And Preventive Maintenance On Municipal Vehicles And Including The School Transport Fleet To Meet The Demand Of The Municipality Of Brasilândia.

Adapter ¼ Inch Male Thread Type, Nickel-Plated Iron Material, High Quality, Durability And Resistance., Pneumatic Propellant For Grease Of 20Kg Pneumatic Propellant For Apportioned Grease, Has Working Pressure Of 87 To 116 And Grease Outlet Pressure Of 4350 To 5800. Includes Grease Control Valve And Swivel Z Connection. Made From Aluminum Steel, It Provides Efficiency And Resistance. -Comes With: ::Lubrifil :: Bucket With Lid And Follower Disc ::1/4 Hose :: Grease Control Valve And Swivel Z Connection - Technical Information: :: In Aluminum / Steel :: Working Pressure From 87 To 116 Psi - 6 To 8 Bar :: Grease Output Pressure From 4350 To 5800 Psi - 300 At 400 Bar :: Ratio 50:1 :: Free Flow Up To (L/Min) 580 :: Air Consumption (Pcm) 7 :: With Drum (Kg) 20 :: Dimensions Axl (Mm) 970 Starter Assistant. Charger For Slow, Fast And Extra Fast Charges With Starting Aid For Passenger Cars, Pickup Trucks, Trucks, Trailers, Buses, Tractors, Forklifts That Make Use Of 1 12V Battery Or Two 12V Batteries To Obtain 24V Voltage. Approximate Minimum Specifications: - Input Voltage: 220V - Variable Consumption: From 150 To 3600W - Output Voltage: 12/24V - Load Capacity: From 10 To 150A - To Assist In Starting, The Manufacturer Recommends That The Device Be Adjusted To 50A - Load Regulators: 1 Selector Switch Of 10 Positions, Positioned On The Front Of The Device - Pilot Light When On Indicates Device In Operation - Protection: Fuse Holder On The Front Of The Device. (20A 250V Fuse) - Load Display: Analog Ammeter Clock From 0 To 150A Positioned On The Front Of The Device - It Is Not Necessary To Remove The Batteries From Your Vehicles To Carry Out The Charge, Car Mechanic Mat With Backrest Approximate Minimum Specifications: Steel Structure Dimensions: 850X42x10 – Lxwxh (Mm) 4 2-Inch Swivel Casters Capacity 100 Kg Electrostatic Painting Padded Headrest Handle For Carrying And Hanging Pre-Approved Brands: Marcon, Fercar And Bremen., Grifo Wrench 18 Inches; Chrome Vanadium Steel Material. Pre-Approved Brands: Gedore, Belzer, Vonder E Tramontina, 12 Inch Wrench; Chrome Vanadium Steel Material. Pre-Approved Brands: Gedore, Stanley And Tramontina., 1 Inch Pneumatic Impact Wrench. Approximate Minimum Specifications: - Torque: 1938 Nm (197.6 Kgf.M) - Rotation: 3,700 Rpm - Working Pressure: 90 Psi (6.3 Bar) - Air Consumption: 50 Pcm/ 23.6 L/S - Air Intake: 1/2 Bsp Pre-Approved Brands: Schulz, Chiaperini E Fortg-Pro., 3/4 Inch Pneumatic Impact Wrench. Comes With Auxiliary Handle And Hose Connector. Approximate Minimum Specifications: - Square Fitting: 3/4 - Mechanism: Twin Hammer - No Load Speed: 4,200 Rpm - Max. Torque: 1,600 N.M (406 Ft-Lb) - Air Inlet: 3/8” - Min. Hose Size: 11 Mm - Air Pressure: 6 – 8 Kg/Cm2 (6, 3 Bar / 90 Psi) 12 Month Warranty. Pre-Approved Brands: Fortgpro, Puma And Potente Brasil., Industrial Compressor 25 Feet 250 Liters 5 Hp 220/380 V Approximate Minimum Specifications: ? ? Voltage: 220/380 Volts ? Three-Phase ? Number Of Cylinders: 2 ?